Contents
How do you reset an Intex hot tub?
How do I reset my Intex spa?
- Locate the spa’s high-limit reset. This is a red button found on many spa packs.
- Press the high-limit reset button.
- Turn on your spa and observe its operation.
- Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power.
What does E94 mean on Intex hot tub?
water temperature is too low
If alarm code E94 is displayed on the control panel, it means the water temperature is too low. If alarm code E94 appears, unplug and plug back in the GFCI/RCD and test the GFCI/RCD to restart the system when the spa water temperature is higher than 39ºF (4ºC).
What is E96?
PureSpa
E96 means the PureSpa is experiencing a system error. If the control panel displays this error, turn off the system and unplug it. Plug the unit back in and restart it. If the error persists, turn it off and unplug it. After unplugging it, unscrew the B and C connection until water starts to leak out.
Should I leave my Intex hot tub filter on all the time?
Yes, you should leave your hot tub on all of the time. Hot tubs are designed to always be switched on and it’s more economical to keep the water hot than it is to heat it up from cold each time you want to use it.
Why does my Intex hot tub keep shutting off?
So, why does my hot tub keep tripping and turning off? The problem could be due to a worn GFCI breaker, moisture or corrosion inside the breaker box, damaged or loose wiring, or malfunctioning components. It could even be down to a bad heating element or a flooded blower.
How long does it take to heat Intex Pure Spa?
The suggested time for the Pure Spa to heat up to the maximum 40 degrees is 12-24 hours. The water heats up around 2 degrees each hour which is more or less spot on with other brands. Many users say that 38 degrees is a comfortable temperature to sit in which will shave an hour or two off the heating time.
When does an Intex pure spa throw an E95 code?
I have an Intex Pure Spa that throws a e95 code, meaning the water is too hot! But it will throw this code if the water is 55 F! So the water is not too hot! The heater works when the code isn’t on.
What does E90 mean on Intex inflatable hot tub?
If you getting an error code of E90 on your Intex Inflatable hot tub control panel it means no water is flowing through the system. Check the attached troubleshooting Manual. For solving this problem all you have to do is following these steps: Clean the filter cartridge of the hot tub or replace it with a new one.
What does the Intex hot tub alarm code E99 mean?
Intex Hot Tub Alarm Code E98 guide Intex Hot Tub Error Code E99. If your Intex hot tub pure spa throwing an error code of E99 it means that your hot tub experiencing an internal error. If you want to solve this error all you have to do is go and check your hot tub by the nearest Intex customer service executive. Intex Pure Spa Reset Button
What to do if your hot tub has an E90 error code?
If you don’t want to see again E90 Error code on your Intex Pure Spa Hot tub make sure these 2 things: Water is filled to the recommended level. The filter cartridge is clean and properly installed. Turn off or unplug the control unit.