Menu Close

How much crush and run Do I need calculator?

How much crush and run Do I need calculator?

Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

How much area does a ton of crush and run cover?

COVERAGE GUIDELINES:1 ton covers an area approximately 135-123 square feet to an average depth of 2 inches.

How many inches of crush and run do I need?

A rule of thumb for many crushed stone projects is to have a minimum depth of 2 to 4 inches, although some projects require more. For example, a patio that’s 12-foot square, with a 2-inch base of crushed stone, will need 0.89 cubic yards.

How much crusher run do I need?

per cubic yard, first determine the volume requirement of your project. Do this in the following steps: Calculate the square footage of your project (L’ x W’) Multiply this by the depth of crusher run desired in feet (D’) e.g. 4” of crusher run would equate to 0.33′

How much is a truckload of crush and run?

Crush & Run Crush and run is one of the cheapest materials that can be used in a gravel driveway at about $0.40 per square foot. Cost per cubic yard is about $20 and per ton about $28.

How much is crush and run a ton?

Crush and Run Prices. Crush and run gravel costs $24 to $34 per ton, about $50 per cubic yard, or $0.50 to $2.00 per square foot, which is one of the cheapest materials. This mixture combines limestone, trap rock, granite, crushed rock, sand, and stone dust.

Is crusher run good for a driveway?

Crusher run is just about the most sturdy and reliable material that you can use for a loose-fill driveway. The crushed stone and the dust will naturally adhere to one another, forming a strong bond that will prevent pieces from shifting and scattering.

How many yards are in a ton of Crush and run?

Since there are 2000 pounds in a ton this is 2700

How to calculate how much Crusher run do I Need?

Crusher Run Calculator is used to calculate how much crusher run do you need for your construction project. The crusher run calculator is calculated based on the width, length and depth of an area. Optionally, you can enter a price per yards, feet or meters to calculate the total material costs.

How many cubic yards of crushed stone do you need?

The first will tell you how many cubic yards of crushed stone you would need to complete your project whereas the second number will be indicative of the volume of materials you’d require in cubic tons. It’s important that you write down the results of your calculations.

How much does crush and run gravel cost?

Crush and run is one of the cheapest materials that can be used in a gravel driveway at about $0.40 per square foot. Cost per cubic yard is about $20 and per ton about $28. How much fill do I need?