How much gravel should I put in my window well?

How much gravel should I put in my window well?

Manufacturers of the metal window well suggest digging deeper into the well and placing 12 inches of gravel at the bottom. This will allow the water to dissipate into the ground slowly. This simple project along with a cover for your metal window well will stop the water from seeping into your foundation.

What do you fill window wells with?

The well is usually partially filled with gravel, and sometimes a drain that connects to your perimeter drain is installed. This added safety measure will ensure that water can’t gather in your well and exert force on the windows, causing them to crack or leak.

Do window wells need gravel?

The traditional material for the bottom of a window well is gravel since drainage is important.

What is the best rock for window wells?

Use pea gravel or ¾ inch or smaller free-draining rock, around the well stopping approximately 1 foot down from the top of the window well.

How long do window wells last?

Square window wells are 18 gauge galvanized steel that is guaranteed for 30 years.

Do window wells have drains?

“Typically window wells have a drain that is connected to the foundation drainage system or drains to daylight somewhere in the yard,” Dennison said. “Over time that drain could become clogged and could possibly need to be cleaned out.”

How do you waterproof a window well?

Basement window wells can be waterproofed. By ensuring proper drainage, replacing your gravel, adding covers, and caulking you’ll be well on your way to keeping water out of your basement.

Do all window wells have drains?

Window Well Drain – Every window well should have a drain to allow water to exit the window well and not build to a level that creates a basement seepage problem. More commonly, though, the drains are there but, because of lack of maintenance, they clog up.

How deep should window wells be?

How Deep Does a Window Well Need to Be? A window well should be roughly 8 inches deeper than the window sill and approximately 6 inches wider than the window opening.

Why do you need rock for window wells?

Rocks are added to window wells to help filter dirt and mud that would otherwise contribute to clogging of the weeping tile system. The vertical drain must be filled with rock and be clear of dirt and mud. The window well itself should have a rock cover to improve the appearance. There is no minimum rock level in…

How much gravel should I put in my Window well?

Click to see full answer. People also ask, how much gravel should I put in my window well? Gravel 4-6” deep is the bare minimum and is useful in draining away only small amounts of water. 12-18” deep is a good idea if you have had water problems.

What should I put in my Window well?

One material often used to help with drainage at the bottom of window wells is small rocks or crushed gravel. Why Are Rocks Used In Window Wells? A common method to help with window well drainage is to place several inches of gravel at the bottom.

Do you need a drain for a window well?

Do window wells need drains? Window Well Drain – Every window well should have a drain to allow water to exit the window well and not build to a level that creates a basement seepage problem. Drains can be connected to interior or exterior drain tile or can be run to daylight where a proper slope exists.