How much pipe does a SharkBite fitting need?
SharkBite push-to-connect pipe insertion depth and pipe size compatibility.
| SharkBite Fitting Size | Nominal Pipe Size | Pipe Insertion Depth (IN) |
|---|---|---|
| 3/8 in. | 3/8 in. CTS | 0.94 |
| 1/2 in. | 1/2 in. CTS | 0.95 |
| 5/8 in. | 5/8 in. CTS | 1.13 |
| 1 in. | 1 in. CTS | 1.31 |
How do you measure insertion depth in Sharkbite?
Measure & mark the insertion depth. Use your SharkBite Deburr & Gauge Tool to measure and mark the insertion depth on your pipe. You can find the insertion depth chart here: 4. Make the connection. Push the fitting to the insertion mark you just made on the pipe. Now, turn on the water and check the connection.
What do you need to know about Sharkbite fittings?
When you insert the pipe, the stainless steel teeth in our push-to-connect fittings bite down and grip tight, while the specially formulated o-ring compresses to create a perfect, secure seal. Browse our brass push products. What is the pipe insertion depth for the SharkBite fittings?
How do you remove a fitting from a Sharkbite pipe?
To remove the fitting, use a SharkBite Disconnect Clip or Disconnect Tongs. To use the Disconnect Clip, snap it on to the pipe and pull up to the release collar. Press the release collar using the Disconnect Clip and pull the pipe from the fitting. To use the Disconnect Tongs, slide the tongs over the fitting and the pipe.
How is the pipe inserted into a Sharkbite joint?
Insert the pipe through the release collar to rest against the grab ring. 2. Push the pipe firmly with a slight twisting action until it reaches the tube stop. 3. To ensure that the pipe is correctly inserted, check that the depth mark is within 0.005 in (0.13 mm) of the end of the release collar Connecting a SharkBite Joint