Menu Close

How much ribbon do I need calculator?

How much ribbon do I need calculator?

The ribbon will travel the length (10 in) twice, the width (8 in) twice and the height (4 in) four times. Sum up these distances will evaluate the total amount of ribbon needed. 10 in + 10 in + 8 in + 8 in + 4 in + 4 in + 4 in + 4 in = 52 inches of ribbon.

How do you calculate ribbon?

To measure ribbon, we measure width by length. For this example, we have a 1-1/2 inch x 10 yards ribbon roll. The first is the width, and the second size is the length. For the Width: Positioned with the ribbon pulled out from the roll, measure from left to right.

How do you determine ribbon length?

If you are measuring in inches you will need to take your calculation and convert to centimetres (x2. 5) as Ribbon usually comes by the metre (1 metre = 100centimetres)….In our example above we have,

  1. height of 9cms x 4 = 36cms.
  2. width of 19cms x 2 = 38cms.
  3. depth of 11cms x 2 = 22cms.

How much ribbon do you need for a present?

It’s all about creases and tight bows: When you’re ready for ribbon, estimate how much ribbon you’ll need by measuring the length and height of the present twice. You’ll also need about 12 to 24 inches of ribbon for the bow. When you tie your first bow, the key is to get it tight.

How much ribbon do you need to make a large bow for the Christmas tree?

Making a large bow for the top of your Christmas tree is going to require a very specific amount of ribbon. Find out how much ribbon you’ll need to make a large bow for the top of your Christmas tree with help from an authority on entertaining in the home in this free video clip.

How do you make a bow out of ribbon?

Now that you have the first tail of your bow measured out, it’s time to make the first loop, which will be your bow’s center. Create a three-inch loop at the top of your 12 inch tail, using the excess ribbon that’s still attached to the spool. Pinch and twist your ribbon, sealing it off (thanks to the wired edges.)

How big of a bow do you need?

A rough calculation for the pieces for the large bow. Cut a piece of fabric – width of the bow you want * 3 = length of the fabric. This is an approximate calculation. If you want long tails you can increase the length. Here I am taking 16 inch wide fabric . so have taken 48 inch long fabric.

How to make a big bow with interfacing?

With interfacing (iron on) the bow will have the needed stability and stay upright. No more droopy big bows. If you donot like the look of interfacing, choose a stiff fabric for making large bows. Decide on the width of the bow you want and the length. Cut a piece of fabric – width of the bow you want * 3 = length of the fabric.