How often should safety nets be drop tested?

How often should safety nets be drop tested?

Safety nets must be drop-tested at the jobsite after initial installation and before being used as a fall protection system, whenever relocated, after a major repair, and at 6-month intervals if left in one place.

When Should OSHA fall protection be inspected?

“Fall protection equipment shall be inspected by the authorized person at least once at the beginning of each eight-hour shift in which it is used to verify that it has not sustained any wear or damage that would require its removal from service.

Who should inspect safety nets?

competent person
5. When should a safety net be inspected? Fall arrest safety nets should be inspected by a competent person during the rigging process and at handover stage to a contractor who is to work above the nets. The user should carry out a visual inspection before commencing work above a rigged safety net system.

Is a safety net Considered fall protection?

Safety nets are designed to hang below high-level work areas such as roofs on residential construction sites. Fall protection safety nets are not a mandatory part of fall protection. According to OSHA a personal fall arrest system means a system used to arrest an employee in a fall from a walking-working surface.

What is the purpose of safety net?

Safety nets are classified as a passive fall protection system which can be installed as either a barrier to prevent a fall, or beneath the work to catch a falling worker. Safety nets are designed to decrease the fall distance, to absorb the energy of a fall, and to reduce the likelihood or seriousness of an injury.

Does OSHA require annual fall protection inspection?

In California, all fall arrest systems and their components must be inspected and documented twice annually by a competent person in fall protection.

What should you inspect on a harness?

Prior to each use, a harness must be inspected for deficiencies including corrosion, deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating, alteration, broken stitching, fraying, and missing or illegible labels.

Where should a safety net be rigged?

Install safety nets as close as possible to the work platform. Rig safety nets to follow the roof line. Nets should not restrict the construction work.

When should a safety net be installed?

Safety nets must be installed as close as practicable under the surface on which employees are working, but in no case more than 30 feet below. When nets are used on bridges, the potential fall area must be unobstructed.

When do safety nets need to be inspected?

Fall arrest safety nets should be inspected by a competent person during the rigging process and at handover stage to a contractor who is to work above the nets. The user should carry out a visual inspection before commencing work above a rigged safety net system

How often should I take my safety net off?

When new, a safety net will normally be supplied with three test meshes loosely attached to the safety net. At no more than 12 month periods a test mesh will be take off and tested.

How often should test mesh be taken off safety net?

When new, a safety net will normally be supplied with three test meshes loosely attached to the safety net. At no more than 12 month periods a test mesh will be taken off and tested (in accordance with ISO 1806).

How are safety nets used for fall arrest?

All safety nets used for fall arrest must be subjected to an annual test of the energy absorption capacity of the net. When new, a safety net will normally be supplied with three test meshes loosely attached to the safety net.