Contents
Is an ejector pump necessary?
An ejector pump is necessary if you have water-consuming appliances or bathrooms installed in the basement or lower level of your home. Because these plumbing fixtures sit lower than the home’s main sewer line, wastewater cannot flow out using gravity and a pump is necessary to move it upwards and out of the home.
How do I know if I need a sewage ejector pump?
If your basement or lower floor bathroom is not, then more than likely, you have a sewage ejector pump installed to push it up above the elevation line and allow it to then flow by the force of gravity.
Do I need an ejector pump for basement bathroom?
Refurbishing, or adding to a basement can create a whole new living space. If this includes a bathroom, a correct plumbing installation must be taken into consideration. An ejector pump must be installed by a professional to ensure your basement plumbing fixtures function properly.
Do all houses have ejector pumps?
While not all houses with basements require ejector pumps, they are essential because they prevent toilets (especially), sinks and bathtubs from backing up due to an excess of wastewater.
How long does an ejector pump last?
7 to 10 years
While most sewage ejector pumps are designed to withstand at least 7 to 10 years of use, with some even lasting much longer, occasionally problems do arise long before the pump has reached the end of its life span.
When to use an ejector pump in a septic tank?
When pumping a very long distance (750 feet or more) You have a high vertical distance to lift the sewage (minimum of 30 feet) Below are the scenarios when a Sewage Ejector Pump will work best: When pumping sewage to a septic tank. When pumping sewage to a gravity sewer main. When pumping sewage short distances (750 feet or less)
How big is the outlet for a sewage ejector pump?
The outlet pipe leaving the sewage ejector pump is usually 2 inches in diameter, connecting to the 3-inch main sewer line. Between the pump outlet point and the junction with the main sewer line, there is always a check valve to make sure that nothing drains back into the sump basin after the wastewater is pumped out.
Do you need an ejector pump for sewage grinder?
Similarly, if you own a single family home but use a septic tank (a common occurrence in rural, out in the country environments), you’ll need a sewage ejector pump at the minimum to pump sewage to the tank. As above, you might want a full-on grinder if your family members are busy using your toilets as trash cans or garbage disposals.
How does a sewage ejector pump in a basement work?
This sump basin collects and holds about 30 gallons of waste, on average, for a moderate-sized home. The drain lines from the various fixtures in the basement area are sloped down into the side of the sump basin, and when the level of wastewater in the sump basin reaches a certain height, a moveable float on the sewage ejector pump starts the pump.