Contents [hide]
The location of the reset button differs with different models – some may be found on the back of the machine – but the basic guide for resetting is to hold the Indesit tumble dryer reset button down (pressing in the red button) and if you hear it click, you’ll know it’s the cause of the tripped electrics.
Why is the dryer blowing cold air?
One of the most common reasons your tumble dryer decides to blow out cold air instead of hot is, rather ironically, because it has overheated. If your tumble dryer does not have a reset button it is likely you will need to replace your thermostat and thermal overload cut-out (TOC).
In some models this should be easily fixable – some tumble dryers have reset buttons on the back of the machine so all you will need to do is hold in the button and wait for it to click. If your dryer’s fuse is blown, you will have to replace it. …
Why did my dryer stop blowing hot air?
If you can’t feel air blowing, then it’s probably clogged. Another possible reason why your clothes dryer is no longer producing hot air is because the heating element is broken. Assuming your exhaust vent isn’t clogged, and the motor/drum are turning properly, a broken heating element is the most likely culprit.
Why does my thermostat keep going out on my dryer?
Dirty Lint Filter: This is because as the filter becomes clogged, the airflow around the appliance is reduced due to cooler air not being circulated. If the temperature rises too high in the tumble dryer, the thermostat will trip.
In some models this should be easily fixable – some tumble dryers have reset buttons on the back of the machine so all you will need to do is hold in the button and wait for it to click. Beside above, why does my tumble dryer not heat up?
The re-set button is usually situated on the rear of the tumble dryer, usually on the back panel. To re-set the heat button on your tumble dryer, press in the red button. How long should a tumble dryer last?
Press and hold down on the spin button and simultaneously turn the dial to the 7 o’clock position. Hold the spin button for around 5 seconds and then release. Turn the dial to the off positionIt may take a few attempts for the machine to reset. Besides, do all tumble dryers have a reset button?
What should I do if my dryer won’t run?
Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.