Contents
- 1 What are the disadvantages of using the traditional mirror method of setting your mirrors?
- 2 What are 2 advantages of using enhanced mirror settings?
- 3 Which of the following is an advantage of enhanced mirror settings?
- 4 What is the traditional mirror setting?
- 5 What mirror setting method should you use?
- 6 When Should traditional mirror setting be used?
- 7 What emotion occurs most in drivers?
What are the disadvantages of using the traditional mirror method of setting your mirrors?
What are the disadvantages of traditional mirror settings? You will need to turn your head to look at blind spots. What are the advantages of enhanced mirror settings? You do not have to turn your head.
What are 2 advantages of using enhanced mirror settings?
Enhanced mirror settings – When adjusting the mirror to this setting, the driver will not see the left and right sides of the vehicle when glancing in the outside mirrors. This setting provides the greatest visibility to the sides of the vehicle and reduces blind spots.
What are not advantages of enhanced mirror settings?
What are the disadvantages of enhanced mirror setting? The disadvantages is that you may get a glare from headlights that may impede your ability to see what’s behind you.
Which of the following is an advantage of enhanced mirror settings?
With the side mirrors now angled outward slightly more, you’ll gain increased visual coverage of your blind spots. You should still perform a quick head check before changing lanes, but you’ll now have almost seamless visual contact with all areas behind your vehicle.
What is the traditional mirror setting?
The BGE setting requires turning the field of view of each outside mirror outward by about 15 degrees from the blindzone setting. For the driver’s side mirror, this can be done by placing your head against the side window as shown in Graphic C and then setting the mirror to just see the side of the car.
When Should traditional mirror settings be used?
This is a traditional mirror setting that may be most appropriately used by drivers of trucks, vans, and SUVs when towing or backing in tight areas.
What mirror setting method should you use?
Turn the mirror outward until you can just barely see the driver’s side of your car. Then, with your head positioned from the center of the vehicle, turn the passenger’s side mirror outward in the same way. This setting should only be used in a vehicle with a rear view mirror that provides an unobstructed view.
When Should traditional mirror setting be used?
Is appropriate for all vehicles in all situations. After your seat is properly adjusted and you are seated in an upright position, adjust the left side view mirror to see the left edge of the vehicle and adjust the right side view mirror to see the right edge of the vehicle.
What is the traditional way of setting mirrors in your vehicle?
Setting Outside Mirrors to the Correct Angle
- Car One: The ‘traditional’ way of setting the exterior mirrors.
- These settings prevent any other vehicles, including motorcycles, from coming up behind, unseen.
- Car Two: Setting the exterior mirrors ‘wide’.
What emotion occurs most in drivers?
1. Aggressiveness and Anger. Aggressiveness and anger are emotional states that extremely influence driving behaviour and increase the risk of causing an accident [21].