Contents
What can I use to clean bearings?
Acetone, isopropyl alcohol and mineral spirits are all good options. When using solvents, wear gloves and avoid contact with your skin. Use a dish or wide-mouthed bottle as a container to soak the bearings for several minutes, occasionally swirling the bearings around in the cleaner.
Can you use WD 40 on longboard bearings?
It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. It doesn’t take much, and the excess will just spin out when you replace your shields, pop your bearings back in your wheels and start shredding. Skate safe and enjoy your new-found speed.”
Can you clean longboard bearings with vinegar?
Pour enough white vinegar into a jar so that the bearing can be completely submerged. Make sure you use WHITE vinegar, not cider or balsamic. … White vinegar does not leave a residue when it evaporates, so you will not need to do additional cleaning.
Can you use WD40 to clean skateboard bearings?
Can you use WD40 on skateboard bearings? NO. WD40 is a degreaser – not a grease!! The object of cleaning your bearings is to remove all the grease, clean the bearings, then add grase back in.
Can I use WD40 to clean bearings?
You should never use WD40 to clean skateboard bearings . This is a product designed specifically made for removing rust and grime, not as a lubricant or cleaner for bearings. It works wonders at first, but you’ll find yourself reapplying more and more as it dries out bearings.
Can I clean bearings with methylated spirits?
The best bet is to use methylated spirit or just soak the bearings in some solvent or alcohol. If you can find a spray-on degreaser, you can blast all the crap out of your bearings to great effect. Lemon juice works well too!
Can you clean bearings with dish soap?
Gently pry up and around the bearing, making sure not to bend it too far out of shape. The shield should remain flat throughout the process, don’t pull up in one spot. Once all shields are off, they should be placed in a bowl of warm water and dish soap. Do not place the shields in acetone/solvent.
What’s the best way to clean your bearings?
Lemon juice works well too! Soak your bearings in your chosen liquid try putting the bearings in a jam jar and shake the bejeezus out of them for about 2 minutes, then rinse them with some more clean solvent. Here at HQ we use a spray on Engine Degreaser to get all the crud out, then soak in Meths.
How do you take bearings out of a longboard?
Taking the Bearings Out. Take the nut off the axle and slide the wheel along the axle so that the innermost bearing is just on the edge of the axle. Using the same kind of motion as you would to open a bottle of beer, prise the bearing out of the wheel. Flip the wheel over and repeat. Remove the bearing from the wheel….
How to properly clean your bearings with isopropyl alcohol?
Put the bearings in a container WITH A LID and fill it to the brim with isopropyl alcohol. Cap the container and shake for 5 minutes. If your bearings are still coated in nasty, repeat the process.
How long to soak bearings?
Soak your bearings in your chosen liquid try putting the bearings in a jam jar and shake the bejeezus out of them for about 2 minutes, then rinse them with some more clean solvent. Here at HQ we use a spray on Engine Degreaser to get all the crud out, then soak in Meths.