Contents
What do you put on driveway edges?
Belgian block, brick, or stone pavers are the most common choices for flat edging. One of two rows of contrasting color on either side will clearly identify the border of your driveway and the lawn. You could also create a basket-weave or other type of pattern to add visual appeal.
How do you install paver edging on a driveway?
Installing Cobblestone Paver Edging for an Asphalt Driveway
- Supplies Needed. Chalk line.
- Mark a Cutting Line. Create a cutting line along the edge of the driveway, using a chalk line.
- Dig the Trenches.
- Set Up a String Line.
- Mix the Concrete.
- Backfill With Concrete.
- Add the Finishing Touches.
What is the best way to edge a driveway?
When edging along walks or driveways, walk on the hard surface as you edge. Keep the trim line in the small space between the grass and hard surface. If grass has overgrown the walk or drive, don’t whack it all at once. Cut it back a little at a time by working the string against the hard surface.
How to install brick driveway in 6 steps?
Install Brick Driveway Edging in 6 Steps. 1 Step 1 – Purchase Needed Materials. Visit your local home improvement store and purchase the type of brick you wish to use for your home’s new 2 Step 2- Check Your Driveway Edges. 3 Step 3 – Dig Trenches. 4 Step 4 – Shovel in Gravel (optional) 5 Step 5 – Place the Bricks.
What should I use to edge my driveway?
Using a flat shovel or a spade, hold it straight up and down to edge the grass away from the bricks that you have installed. Alternatively, you could use a gas powered edger for this as well. You now have added a beautiful brick driveway edging to increase your curb appeal.
What’s the best way to lay a brick edge?
A small boat level is ideal for this. Narrower units, such as edging kerbs or tiles can be laid flat, with no crossfall in either direction, but wider units, such as blocks, setts or road kerbs, are better laid with just a touch of fall to one edge, so that water is less likely to sit on the surface.