Contents
What does camber help with?
A negative camber setting can provide increased handling during heavy cornering. However, it generally reduces the contact surface between the tires and the road surface during straight ahead driving. Positive camber may be ideal for off-road vehicles such as large agricultural tractors.
How many camber bolts do I need?
There is no problem running two oem camber bolts. If you need more than -2.0 you should be running camber plates or custom arms, not bolts. One lobed bolt is enough, especially if your car is lowered.
Can I get an alignment with camber?
All vehicle manufacturers will provide exact specifications for appropriate camber. Technicians will use these angles to properly align the camber. If you think that your vehicle is due for an alignment, you can (call the store for an appointment).
Is camber positive or negative Better?
‘ Positive camber is for stability, while negative camber is common in high performance vehicles that require better cornering. Quick fact: While some positive or negative camber is good, too much of either is bad.
How much does it cost to replace camber bolts?
The easy way of fixing it is to get a front camber kit which consist of two camber bolts they normally cost about $35 online they have to make a profit off parts so $50 sounds normal for the parts. The $85 for labor sounds right because it includes an alignment.
How does a camber Bolt work on a car?
Some vehicles come with camber bolts already in place as 1 of the 2 strut bolts. The camber bolt has an off-centered lobe that manipulates the vertical position of the knuckle and wheel to a slight degree. Most often, camber measurement can be corrected with a camber bolt. Put on the safety glasses and place the vehicle on the alignment rack.
How are camber bolts used in 2nd Gen frontiers?
For 2nd-gen Frontiers, this is done by replacing the Lower Control Arm (“LCA”) inner mounting bolts with eccentric camber bolts. The camber bolts allow the LCA to move outward and inward slightly to help correct wheel camber and wheel caster angle.
How is camber measured in a car alignment?
Camber is measured in degrees when performing an alignment. Some vehicles come with camber bolts already in place as 1 of the 2 strut bolts. The camber bolt has an off-centered lobe that manipulates the vertical position of the knuckle and wheel to a slight degree. Most often, camber measurement can be corrected with a camber bolt.
Where can I get cheap LCA camber bolts?
Many people run this type as the D-shape camber bolts are the most inexpensive way to get LCA camber bolts, and are available from multiple aftermarket Nissan sources such as PRG, Nisstec, and 4×4 Parts. You can also find even cheaper versions on Amazon and eBay.