Contents
What does F1 mean on a gas oven?
The “F1” fault code indicates one of the following possible failures: Shorted keypad which is part of the Electronic Oven Control (EOC) Failed Electronic Oven Control (EOC) Oven temperature sensor is bad (this is located inside the oven cavity at the upper left rear corner).
Why is my Kenmore stove beeping F1?
The F1 error means that there is an electronics failure within the oven. This failure can occur within the keypad itself, the electronic oven control or the oven temperature sensor. The error can also indicate data corruption within the oven’s electronic controller.
What to do if your oven has an F1 code?
If that procedure doesn’t work, the company recommends calling an authorized service representative. In the case of an F1 code, though, the fault is with the electronic oven control, and that’s a part you can replace yourself. When an F1 error occurs, the display flashes the code and beeps at the same time.
What causes an F1 code on a Kenmore range?
How to Fix an F1 Error On a Kenmore or GE Range – YouTube The beeping F1 or -F1- code is caused by a malfunction in the front button panel, known as the oven control board. Repair it yourself for under $160 instead The beeping F1 or -F1- code is caused by a malfunction in the front button panel, known as the oven control board.
What does F3 mean on an oven controller?
F3 means the controller has detected an open circuit in the temperature sensor path. Usually this is an extreme case of the causes of F2, and may accompany it. F4 is a shorted sensor. Look for pinched leads or scraped insulation on the wires going to the temperature probe.
Why is my oven F2 and F4 not working?
Usually this is an extreme case of the causes of F2, and may accompany it. F4 is a shorted sensor. Look for pinched leads or scraped insulation on the wires going to the temperature probe. Sometimes the oven fails leaving the door in a mechanically locked condition.