Menu Close

What happens if you leave transit bolts in washing machine?

Jim Brown

What happens if you leave transit bolts in washing machine?

The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed. In other words, by not doing as instructed you risk major damage to your washing machine.

Will a washing machine work with transit bolts in?

The transit bolts need to be removed when the appliance is being installed. They are designed to hold the drum in a fixed position while being transported. Failure to remove this will void the warranty, so please refer to the appliance manual for additional guidance.

How do you fit transit bolts to a washing machine?

By sliding the bolt, the bare end of the transit bolt shaft will find the attachment hole on the washing machine drum and literally insert itself. Once inserted, begin screwing the bolt in. Tighten down the bolt with the wrench. The tub will stabilize more after each bolt is installed.

Should I remove shipping bolts from washing machine?

The shipping bolts keep the tub secure during a move and reduce the amount of vibration that could cause damage to the suspension. Before installing the washing machine, it is required that you remove all shipping bolts from the back of the unit.

Why are there transit bolts on my washing machine?

When you buy a new front loading washing machine, its drum will be held in place by four transit bolts. These are put in place by the manufacturer to keep the drum from moving during transport from the warehouse – if the drum was left unsecured, bumps during delivery could damage your machine.

What are transit bolts and why are they there?

What are transit bolts, why are they there and what should I do with them? When you buy a new front loading washing machine, its drum will be held in place by four transit bolts.

What are the transit bars on a washing machine?

Whenever you buy a new washing machine there are what is known as “transit bars” or “transit packaging” to stop the drum unit inside from moving about and banging off the insides of the outer cabinet.

Do you need a key to tighten the transport bolt on a BOSH washing machine?

And, finally, the transport bolt is screwed. To tighten, you need an ordinary standard key, no special keys are needed. With a washing machine, the instruction is mandatory. It is attached to all brands, whether it be Bosh, Indesit or, for example, Beko.

What happens if you leave transit bolts in washing machine?

Jim Brown

What happens if you leave transit bolts in washing machine?

The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed. In other words, by not doing as instructed you risk major damage to your washing machine.

How do you secure a washing machine drum without transit bolts?

If you cannot use shipping bolts, you’ll want to make sure there’s no water in the bottom of the tub, and fill it with furniture blankets. Remove the drain hoses and power cord, wrap the machine with dolly straps, and load it onto a hand truck or dolly for transport.

Why do washing machines have transit bolts?

A transit bolt, also called a washer shipping bolt, is installed through the back a washing machine to keep the tub from moving around during shipping. In many cases when the washer was delivered and set up, the delivery crew will give you the bolts once they have been removed from the washer.

Will washing machine work with transit bolts?

Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it. However, you must remember to remove the transit bolts once your move is complete, as they can seriously damage your machine should you begin a wash cycle with them still in place.

Will a washing machine work with transit bolts?

How do you secure a washing machine drum for transport?

Preventing a washing machine’s drum from excessive motion during your move will protect the suspension from breaking. You can do this by securing the drum with shipping bolts or transit bolts. These metal rods are inserted into special slots in the rear of the washer to secure the drum.

Do you put transit bolts back on when moving washing machine?

Drums usually have a massive lump of concrete to stabilise the drum. The drum is suspended between two or more springs. Not having them in can result in damage to the casing from the concrete bashing into the side also damage to the springs or their mounts is possible too. They don’t have to be clean – they don’t go into the drum. I never have.

What should I do if my transit bolts come off?

Try removeing the back panel and see if the belt has come off. And also make sure the wiring to the motor is ok and not come loose. But sometimes what happens when you leave the transit bolts on is the machine jumps around and knocks the belt off so just check the belt first.

What happens if I use my washing machine without removing the bolts?

Severe damage to the unit can happen if the washer is ran for long periods with the shipping bolts installed and most manufacturers do not cover damage caused by this under warranty. Are washer shipping bolts universal?

What happens if I use my washing machine without removing it?

These bolts “lock” the drum unit in place stopping it from moving. Secondly, will shipping bolts damage washer? But, if you installed the washer yourself or you moved to a new home, you may still have the shipping bolts installed in your washer.