Menu Close

What happens when a fill valve goes bad?

What happens when a fill valve goes bad?

Humming and Screaming. As the metal parts of an old ballcock-style fill valve wear out, the valve may not open or close smoothly, and the force of water flowing through the aperture can create some disturbing sound effects.

Do toilet fill valves go bad?

The valve can go bad and get to the point where even after adjusting the float, the toilet will continue to run, wasting water. Replacing the fill valve is not a difficult job, read on and learn how.

How long do fill valves last?

In general, a common toilet fill valve lasts for about four to five years if you take proper care and maintenance. The harsh chemical bowl cleaners cause damage the valve and reduce its lifespan in more than half. You can face problem with poor fill valves.

How can you tell if a toilet fill valve has gone bad?

If the float reaches its shut off point and the tank keeps filling, then the fill valve has gone bad. 2 – Toilet Won’t Flush or the Flush is Weak A weak flush or no flush at all when the handle is depressed may mean that the toilet tank is not being filled with water properly.

What happens if water is running over the fill valve?

If the water is running over the fill valve and into the overflow hole, the float could be set incorrectly. Simply bend the arm of the float downwards so that the float will trigger the water shut off at a lower level.

How can I tell if my toilet has a flapper or valve?

In order to determine if the underlying problem is the flapper or valve, all you need to do is put dye into the water inside the toilet tank. Wait a few hours without flushing the toilet and check to see if the water in the bowl has changed color. If the water has not changed, the fault lies with the fill valve.

How do you replace a water fill valve?

Replacing a fill valve is relatively easy. You will need to shut off the water, empty the tank and disconnect the water supply before you can begin. To remove the old valve, you will need to loosen the retaining nut located under the tank and lift out the valve.