What is a knockout plug?

A knock out plug is a hole that has a cover over it. You will usually need to use a screw driver and a hammer to “knock out” the cover. Check out this picture…. Once you knock out the plug, be sure to remove the plug because it may clog the drain if you leave it in there.

Where is the knockout plug on a disposal?

Usually located near the top of the unit is a drainage port where the dishwasher’s drainage tube gets attached. If this tube is attached already, disconnect it using the appropriate screwdriver for the job. Inside the garbage disposal, behind this tube mount, is where the knockout plug lives.

Are dishwasher power cords universal?

Are dishwasher power cords universal? No, the cord is not interchangeable. This cord can not be used with any other dishwasher brand.

Should LG dishwasher be connected to hot or cold water?

If the hot water exceeds 65°C, adjust the water heater setting. If the hot water temperature can not be maintained below 65°C, the dishwasher must be connected to cold water.

How do I get the knockout plug out of my dishwasher?

Remove the plastic plug from the garbage disposal with a pair of needle nose pliers by pulling it out or by using a flat screwdriver and “knocking” it out. 6. Dispose of the plastic knockout plug.

Why is there a knockout plug in my garbage disposal?

In this instance, the culprit is often what’s called a knockout plug. Luckily, as its name implies, solving this problem is as simple as knocking out a plastic plug. Doing this allows water to travel freely from the dishwasher through the garbage disposal drainage pipe.

How do you remove a drain plug from a dishwasher?

If the dishwasher drain hose is connected to the disposal, remove the hose it from the fitting. 4. Locate the small plug in the plastic fitting. 5. Remove the plastic plug from the garbage disposal with a pair of needle nose pliers by pulling it out or by using a flat screwdriver and “knocking” it out. 6. Dispose of the plastic knockout plug. 7.

What do you use to knock out a plug?

A knock out plug is a hole that has a cover over it. You will usually need to use a screw driver and a hammer to “knock out” the cover. Check out this picture….

What is a knockout plug?

A knock out plug is a hole that has a cover over it. You will usually need to use a screw driver and a hammer to “knock out” the cover. Check out this picture…. Once you knock out the plug, be sure to remove the plug because it may clog the drain if you leave it in there.

What is a knockout on a garbage disposal?

The garbage disposal has an outlet for your dishwasher to drain into it and the main purpose of the knockout plug in garbage disposal is to create a watertight seal in the event you do not have a dishwasher.

Where is the garbage disposal plug?

With the plug-in configuration, the disposal cord plugs into an outlet (receptacle) located inside the sink cabinet. The outlet is controlled by a wall switch, which is usually located on the wall near the sink.

Does a garbage disposal need a power cord?

You’ll need a power cord, which you can usually remove from the old disposal and reuse. Garbage disposals should be either hardwired or connected to an outlet through a grounded electrical outlet. A dedicated circuit is generally recommended, although a circuit that is shared with a dishwasher is sometimes appropriate.

Why is there a knockout plug in my garbage disposal?

In this instance, the culprit is often what’s called a knockout plug. Luckily, as its name implies, solving this problem is as simple as knocking out a plastic plug. Doing this allows water to travel freely from the dishwasher through the garbage disposal drainage pipe.

Where is the knockout plug on a dishwasher?

Usually located near the top of the unit is a drainage port where the dishwasher’s drainage tube gets attached. If this tube is attached already, disconnect it using the appropriate screwdriver for the job. Inside the garbage disposal, behind this tube mount, is where the knockout plug lives.

Where is the drainage plug on a garbage disposal?

Unplug your garbage disposal so you can work safely. You’ll need a hammer and screwdriver to get this job done, and needle-nose pliers are optional for the final step. Usually located near the top of the unit is a drainage port where the dishwasher’s drainage tube gets attached.

What do I need to unplug my garbage disposal?

Unplug your garbage disposal so you can work safely. You’ll need a hammer and screwdriver to get this job done, and needle-nose pliers are optional for the final step.