Menu Close

What is the best finish for IPE decking?

Jim Brown

What is the best finish for IPE decking?

What Is The Best Finish For IPE Decking? The best deck finish for IPE wood is Messmer’s UV Plus deck stain. This is a penetrating wood and deck stain that protects exterior wood from the elements. The Messmer’s UV product is formulated for pressure-treated lumber as well as IPE decks.

Does IPE decking need to be sealed?

Do I have to seal Ipe wood? No, but you really should. During the initial exposure of your Ipe decking or hardwood siding on site, weather, especially UV rays, take a toll on outdoor woods. Proper UV protection helps minimize surface checking on your deck or siding boards.

How do you keep IPE looking new?

Ipe decks should be regularly kept clean of dirt and debris. Sweep leaves off the deck, don’t let rusting items sit on the wood, and hose off mud or spills. You can use a hose to safely clean off your deck but be careful when using a power washer.

How often should I oil my ipe deck?

In order to obtain an keep a great looking deck, we recommend annual maintenance. For even better results you can apply maintenance twice: once in the spring and once just before fall. This will ensure a faster project and easier preparation, since you don’t let the wood go too grey.

What oil do you use on ipe decking?

When deck builders need their customer’s hardwood projects to last 75 years or more and maintain its natural beauty, they turn to Ipe Oil® deck oil. 1 gallon of Ipe Oil® Hardwood Deck Oil covers approximately 250 ft2 and is formulated as an oil-based natural wood finish with a 250 VOC.

What do you seal IPE with?

Finishing Ipe and other high density tropical hardwoods is fairly easy to do. Simply apply a coat of an appropriate sealer, such as Penofin® Oil Finish according to the manufacturer’s directions and you’re done.

What oil do you use on IPE decking?

Ipe is just too dense and oily to make a good substrate for film-forming finishes, and even has a hard time accepting penetrating oils. Even so, a good penetrating oil with a high trans-oxide pigment content is our preferred ipe finish; we’ve had the best luck with Penofin’s Marine Oil.

Should I sand or pressure wash Ipe deck?

If ever you skipped maintenance for a longer period of time and the wood has become grey, we recommend a good pressure wash (Saicos Wood Brightener works well). Let it dry for a day or two, then give it a light sanding to smooth and remove any remaining grey spots – and is ready to oil, very simple.

Can I pressure wash my Ipe deck?

Can I Power Wash My Ipe Decking? It is not recommended to power wash your Ipe decking, and the pressure can damage your boards. If you do choose to power wash, it is recommended that you use a low-pressure, wide-spray setting, certainly no more than 1,200 psi.

When to use oil based sealer on IPE deck?

Either an oil based product or good penetrating oil (depending on the finish wanted) goes hand in hand with Ipe decking, all deck sealing materials must come with high moisture content on new wood immediately. This is because of accelerated drying damage, which usually happens the 1st month after the deck has been built.

What kind of Sealer to use on wood deck?

Ipe Seal ® from DeckWise ® is a wax emulsion sealer proven to increase the structural integrity of hardwood decking.

How to choose the best stain for an IPE deck?

You can choose the best vacuum cleaner for your Ipe deck based on the world’s best Shark vacuum reviews. Step 3 – Choosing a wood stain. Ensure that you choose a stain that is designed for dense wood. Also, ensure that you clean the deck 2 to 3 days before applying the stain. Step 4 – Staining

Can a wood deck be treated with Ipe?

Every deck surface, no matter whether it’s Ipe, treated wood or composite decking, can hardly avoid at least some of possible outdoor effects. Generally, this can be the sun, rain, leaves, dirt, mildew, mold, insects and the like.

What is the best finish for IPE decking?

Jim Brown

What is the best finish for IPE decking?

What Is The Best Finish For IPE Decking? The best deck finish for IPE wood is Messmer’s UV Plus deck stain. This is a penetrating wood and deck stain that protects exterior wood from the elements. The Messmer’s UV product is formulated for pressure-treated lumber as well as IPE decks.

Can you stain an ipe deck?

IPE is an extremely beautiful wood when stained and will be the envy of your neighbors. The problem with exotic hardwood decking such as IPE is that it will require maintenance annually. It is best to choose a pigmented wood stain that will enhance the reddish brown tones of the IPE as if wet with water.

How do I maintain my ipe deck?

Ipe decks should be regularly kept clean of dirt and debris. Sweep leaves off the deck, don’t let rusting items sit on the wood, and hose off mud or spills. You can use a hose to safely clean off your deck but be careful when using a power washer.

Is it OK to power wash Ipe deck?

It is not recommended to power wash your Ipe decking, and the pressure can damage your boards. If you do choose to power wash, it is recommended that you use a low-pressure, wide-spray setting, certainly no more than 1,200 psi.

Is it OK to power wash ipe deck?

Can a wood deck be treated with Ipe?

Every deck surface, no matter whether it’s Ipe, treated wood or composite decking, can hardly avoid at least some of possible outdoor effects. Generally, this can be the sun, rain, leaves, dirt, mildew, mold, insects and the like.

What should I know about staining my wood deck?

Deck Stain Essential#2: Prepare new wooden decks differently than old ones before finishing. You wouldn’t manage your teenager the same way as your elderly parents. Old and new decks require the same sensitivities. Deck Stain Essential#3: Never trust any untested deck stain. This is where people usually mess up.

How often should I Clean my IPE deck?

It’s also necessary to clean or sand Ipe wood surface a little before reapplying. Either bleach + water + detergent mixture, or special deck cleaners with a stiff brush go a long way. The key thing is not to harm the wood. Typically, a few hours twice a year will be enough.

Is the IPE deck too high maintenance for a boat?

Sure, it works on boats, but is way too high maintenance for a home. Owners of boats with exotic woods generally have very good maintenance habits prior to each season, which attributes to the success of films on boats. But a boat is only in the water half the year.

What is the best finish for IPE decking?

Jim Brown

What is the best finish for IPE decking?

What Is The Best Finish For IPE Decking? The best deck finish for IPE wood is Messmer’s UV Plus deck stain. This is a penetrating wood and deck stain that protects exterior wood from the elements. The Messmer’s UV product is formulated for pressure-treated lumber as well as IPE decks.

Do you need to stain IPE decking?

The problem with exotic hardwood decking such as IPE is that it will require maintenance annually. It is best to choose a pigmented wood stain that will enhance the reddish brown tones of the IPE as if wet with water. This will filter the UV and prolong the graying.

How do you clean and stain ipe decks?

Use the vacuum to eliminate the dust and dirt from the deck tiles. Next, rinse the hardwood with your garden hose. If any dirt stains remain at this point, you can mix a quarter of bleach into a gallon of lukewarm water and mop the wood boards before rinsing them again.

Should you oil ipe deck?

If you want your IPE decking to remain naturally brown, you should apply a layer of IPE oil every year. Otherwise, you can just leave it as it is and ensure that you clean it regularly. The best part about not using IPE oil on a wood decking is that the silver patina is not permanent.

How do you maintain ipe decking?

Ipe decks should be regularly kept clean of dirt and debris. Sweep leaves off the deck, don’t let rusting items sit on the wood, and hose off mud or spills. You can use a hose to safely clean off your deck but be careful when using a power washer.

Should I sand or pressure wash ipe deck?

If ever you skipped maintenance for a longer period of time and the wood has become grey, we recommend a good pressure wash (Saicos Wood Brightener works well). Let it dry for a day or two, then give it a light sanding to smooth and remove any remaining grey spots – and is ready to oil, very simple.

How do I care for my ipe deck?

What kind of stain to use on ipe wood?

Use a Penetrating Stain. Besides being hard, ipe is an oily wood, and any type of finish that forms a film, such as varnish or polyurethane, will begin to peel and flake soon after you apply it. A better option is to use a penetrating oil finish. The oil won’t penetrate the close-grained wood very deeply, however,…

What should I use to clean my IPE deck?

An unfinished ipe deck requires little more than an occasional cleaning with a power washer to remove stains from fallen leaves and branches. Chris Deziel has a bachelor’s degree in physics and a master’s degree in humanities.

Which is the best finish for Brazilian ipe wood?

A better option is to use a penetrating oil finish. The oil won’t penetrate the close-grained wood very deeply, however, and the residue that remains on the surface will quickly become tacky unless you wipe it off.

What is the best finish for ipe decking?

Jim Brown

What is the best finish for ipe decking?

What Is The Best Finish For IPE Decking? The best deck finish for IPE wood is Messmer’s UV Plus deck stain. This is a penetrating wood and deck stain that protects exterior wood from the elements. The Messmer’s UV product is formulated for pressure-treated lumber as well as IPE decks.

Does ipe decking need to be sealed?

Do I have to seal Ipe wood? No, but you really should. During the initial exposure of your Ipe decking or hardwood siding on site, weather, especially UV rays, take a toll on outdoor woods. Proper UV protection helps minimize surface checking on your deck or siding boards.

Can you leave ipe unfinished?

For longevity, ipe requires maintenance. Above: Left unfinished, a water-resistant ipe deck has turned a silvery gray color. To extend its life, ipe wood requires some TLC. With oil treatment, its lifespan can be up to 75 years. Tip: Remember to seal the ends of the wood after cutting.

How do you keep ipe looking new?

IPE Deck Monthly Cleaning

  1. Remove the garden furniture from the deck.
  2. Look for leaves or rubble blocking the drainage and ventilation, and remove any pollen or algae that may have gathered on the surface.
  3. Use the vacuum to eliminate the dust and dirt from the deck tiles.
  4. Next, rinse the hardwood with your garden hose.

How long will an ipe deck last?

Lifespan. Both ipe and mahogany have very long lifespans. They can range from 20-40+ years if deck owners take the proper care to maximize the deck’s life. However, this is all dependent on your substructure.

How often should I oil my ipe deck?

In order to obtain an keep a great looking deck, we recommend annual maintenance. For even better results you can apply maintenance twice: once in the spring and once just before fall. This will ensure a faster project and easier preparation, since you don’t let the wood go too grey.

Should I sand or pressure wash ipe deck?

If ever you skipped maintenance for a longer period of time and the wood has become grey, we recommend a good pressure wash (Saicos Wood Brightener works well). Let it dry for a day or two, then give it a light sanding to smooth and remove any remaining grey spots – and is ready to oil, very simple.

Is IPE decking worth the cost?

Among hardwoods, ipe is considered the most prestigious and valued wood. It stands out for its strength, durability, and density. These properties make it rot resistant, mildew resistant, scratch resistant, and the density is the reason it has a class-A fire rating.

Do you need to put top coat on IPE deck?

In the end since Ipe is so hard to begin with and already an oily tropical wood you don’t need to apply an oil or penetrating finish that will just darken the wood. What you want to do is seal it with a top coat to prevent additional absorption of material.

Where to store decking boards for IPE installation?

Ideally you should store your decking boards under cover and near where they will be installed so they can come into an equilibrium of sorts with the environment. An installation that is rushed will result in a deck that won’t lay flat and which may crack or buckle later on.

When to use ipe sealers and deck cleaning?

Ipe Sealers & Ipe Deck Cleaning. Ipe deck treatment is only needed if you desire to keep the rich brown colours that exist in a new installation. Ipe lumber will age to a natural silver gray patina, and outlast most woods with no chemical coating.

Do you overapply penetrating oils on IPE deck?

Do not overapply penetrating oils, but do use them, and wipe excess. I have been told that ipe has the structural density of steel. Throw a piece in some water, and watch it sink. This density makes it a finishing anomoly.