Menu Close

What is the default installer code for a Simon XT panel?

Jim Brown

What is the default installer code for a Simon XT panel?

4321
Installer code Depending on how the access code is set, the default installer code is 654321, 54321, 4321 (factory default), or 321.

How do I program my sensors Simon XT?

Simon XT – Programming A Door / Window Sensor

  1. Press or until SYSTEM PROGRAMMING then press.
  2. Enter Installer Code 4321 (Call Brinks Home Security® if this code is different)
  3. Press or until SENSORS then press.
  4. Press again to place Simon XT into sensor learn mode.
  5. Remove sensor cover or press button to learn.

Why is my Simon XT beeping?

Is your Simon XT beeping to indicate “System Low Battery.” This condition occurs if the emergency backup battery has failed or if the system was powered up in the wrong sequence. You should see your System Status button lit and frequent status beeps.

How do you reset a GE house alarm?

How to Reset a GE Home Alarm System

  1. Press the “1” or “Disarm” button on the alarm control panel.
  2. Enter your access code using the numeric keys or the keys on the side of the control panel.
  3. Wait a moment. The alarm will be reset once your code is accepted.

How to disarm GE Simon XT quick user guide?

GE Simon XT Quick User Guide GE Simon XT Quick User Guide Page 2 Arming & Disarming the System Arming (Turning on) Close all sensors (i.e. close doors and windows). The ready indicator should be on. Arm the system using either of the methods below. Arming Method – Stay Mode Press DOORS+WINDOWS button.

Is there a way to reset the Simon XT alarm?

If the settings you have programmed into the Simon XT no longer suit your purposes, or if the alarm has a problem, you can reset it. Open the Simon XT alarm’s panel cover. Unplug the transformer and disconnect the battery.

How long does a Simon XT battery last?

1. Press STATUS button 2. Press DISARM to clear trouble if possible Was this article helpful? Wish the battery would have lasted a little more than 15 months, but was very inexpensive to replace. I love having my alarm system from SafeMart.

How to change master code on Simon XT?

The master code is the only code that can add and delete other user codes and perform other various functions (such as entering date and time) on the alarm system. The master code can be changed, but cannot be deleted. To change the Master Access Code: 1. Press OK to enter the System Menu . 2. Scroll up/down to System Programming and press OK.

What is the default installer code for a Simon XT panel?

Jim Brown

What is the default installer code for a Simon XT panel?

4321
Installer code Depending on how the access code is set, the default installer code is 654321, 54321, 4321 (factory default), or 321.

How do I power cycle my Simon XTi?

Simon XTi – Power Cycle Panel

  1. Insert coin into bottom right corner slot then twist to remove front bezel.
  2. Pry top tabs up then fold down front cover.
  3. Unplug battery and remove battery pack.
  4. Disconnect AC transformer and unplug battery.
  5. Plug battery back in and plug in AC power transformer. Was this article helpful?

How do you turn off Simon XTi?

Simon XT – Power down

  1. 2) Go to your keypad and press down on the two tabs on the top of the keypad. This will allow for the front of the keypad to swing down.
  2. 2) Disconnect the battery from the panel by taking off the positive and negative leads from the battery.
  3. ***!!!

How do I change the master code on my Simon XT?

Simon XTi – Change Master Code

  1. Press bottom right GEAR icon then press DOWN ARROW several times.
  2. Press ENTER button by Programming then enter Master Code then press OK.
  3. Press ACCESS CODES then press box by Master Code.
  4. Enter new Master Code then press SAVE then CLOSE button to exit User.

How do you reset the charging circuit on a Simon XT panel?

Troubleshooting System Low Battery on Simon XT

  1. Unplug the transformer from the wall outlet.
  2. Wait 30 seconds.
  3. Connect the two quick connects on the back of the system.
  4. Plug the transformer back into an active wall outlet.
  5. Wait as the system powers back up. The System Low Battery should clear.

How do I change my Simon XT password?

How do I reset my GE alarm without code?

How do I reset my home alarm without the code?

  1. Unplug the transformer from the power source.
  2. Disconnect the battery.
  3. Plug the transformer back in.
  4. Reconnect the battery.
  5. Within 30 seconds of turning the alarm system on, press * and # at the same time.
  6. Enter *20.
  7. Enter a new 4 digit installer code.