Menu Close

What is the maximum height to install a smoke detector?

What is the maximum height to install a smoke detector?

The smooth ceiling 30-foot spacing guideline of NFPA 72, with permitted • increases for narrow space geometry, allows smoke detectors to extend to approximately 41 feet on-center and along a corridor. For ceilings up to 24 feet in height, the deep-beam configurations do not negatively affect expected performance.

Can you mount smoke alarms vertically?

Tray Shaped Ceilings: Smoke alarms or smoke detectors shall be installed on the highest portion of the ceiling or on the sloped portion of the ceiling within 12 in. (305mm) vertically down from the highest point.

What are the advantages of smoke detectors?

Properly installed and maintained smoke alarms are considered to be one of the best and least expensive means of providing an early warning of a potentially deadly fire and could reduce by almost half the risk of dying from a fire in your home.

What is listed spacing?

Listed spacing — the spacing for which a heat detector is rated. Partitions — walls extending from the floor toward the ceiling. If they are within 15% of the ceiling, consider the space separated by the partitions as separate rooms.

How tall of a ceiling do smoke detectors need to be?

There is inconsistency in design and code enforcement for spacing requirements of smoke detectors when installed in areas with high ceilings, where high ceilings are defined as over 10 feet in height. Clarification is required in NFPA 72 on how to apply smoke detection spacing requirements for these high ceiling applications.

Where are smoke detectors supposed to be mounted?

According to Section 5.7.3.2, NFPA 72, 2007 Edition, spot-type smoke detectors can be mounted either on the side wall or ceiling. When using the side wall, mount the device no closer than 4 inches from the ceiling.

How to calculate beam spacing for smoke detectors?

How to Calculate Smoke Detector Spacing with Beam Construction To calculate the beam depth for smoke detector spacing, convert your overall ceiling height into inches. For example, if your ceiling is 12 feet it would convert to 144 inches. Take 144 and multiply it by 0.1 to get 10%. 144″ x 0.1 = 14.4″.

How tall should a fire alarm be in relation to the wall?

However, a detector should be no more than 5m from any wall, or obstruction, and there should be no more than 10m between detectors. It may be necessary to have additional detectors fitted, depending on the building’s layout. What is the maximum mounting height for a heat detector?