Contents
What parts do you need to install a new toilet?
Parts Needed for Toilet Replacement
- Closet Bolts.
- Closet Bolt Covers.
- Wax Bowl Ring.
- Closet Flange Extension Ring.
- Toilet Flapper.
- Toilet Tank Lever.
- Oatey Liquilock (optional)
Do you need a plumber to install a toilet?
Yes. A toilet is part of your plumbing system, and needs to be installed by a licensed and qualified plumber. If you are undertaking a complete bathroom renovation and replacing your toilet as part of this job, your bathroom renovator needs to be appropriately licensed and use a plumber for this job.
Is it hard to install a toilet?
Replacing a toilet is a major project, but it is not as difficult as might be imagined. The hardest tasks usually are selecting a new toilet and removing the old one. Then remove the tank cover, flush the toilet and sponge the tank dry. Use a plumber`s plunger to force as much water as possible out of the bowl.
Can I change a toilet yourself?
Installing a replacement toilet is essentially the same process, in reverse: preparing and cleaning the space, placing a new wax ring, setting the new toilet and sealing the ring, attaching the nuts, washers, bolts, and bolt caps, securing the tank and valve assembly, adding the toilet seat, and finally, turning the …
What kind of tools do you need to fit a toilet?
The equipment and tools needed to fit a toilet, particularly if you’re replacing an old one, can vary, but the standard tools are: 1 Adjustable wrenches 2 Screwdriver 3 Silicone sealant 4 Cartridge gun 5 Adjustable pliers 6 Electric drill 7 Spirit level 8 Cleaning equipment – bucket, sponge, detergent 9 Safety glasses
What’s the best way to install a toilet?
The best approach for how to install toilet is to buy a second set of nuts and washers so you can lock the bolts in place before you set the toilet. To make sure they’re in the correct position, set the toilet and check its height and position.
What kind of bolts do you need to install a toilet?
Most toilet bolts and nuts are brass, so they’re easy to cut. If the bolt spins, grab it with locking pliers as you cut. Setting a toilet onto the new bolts can be the most frustrating part of the whole installing a toilet job. The bolts slip and tip as you’re straining to align them with the holes in the toilet.
What’s the best way to replace the bottom of a toilet?
Unbolt the old flange and place the new flange over the hole. Next, drive in any mounting bolts through the flange and into the floor. Fit a new wax ring around the bottom of the toilet bowl, just around its drainage hole. Wax rings come either plain or with a funneled inside edge.