Contents
What type of walls do mobile homes have?
They will be finished with a variety of wall materials. If you’re looking at older mobile homes, you’re likely to find Vinyl on Gypsum (VOG) wallboards, and most new manufactured homes have either Paper on Gypsum (POG) wallboard or finished drywall options.
What kind of drywall do they use in mobile homes?
The most common type of wall used for a manufactured home is called Vinyl-Over-Gypsum or VOG for short. VOG is drywall that is coated in vinyl wrap. This is different way of treating drywall as compared it being taped, floated, textured & painted.
What are mobile home exterior walls made of?
Siding. The outside component of an exterior wall in a mobile house trailer is typically constructed out of one of three different materials: metal, hardboard or vinyl. This part of the exterior wall is the part exposed to the weather. Vinyl is the best siding to keep water from getting inside the wall.
Are there studs in a mobile home?
Manufactured homes are largely built the same. There are still manufactured homes built with 2”x3” interior wall studs, however. Keep in mind that interior, non-load bearing walls are simply dividing up the interior space of the home and are not structural.
How thick is drywall in a mobile home?
Most original sheetrock in mobiles are 3/8 thick, If you use mollys for 1/2″ you should be fine. Mobile homes are designed to be light, but the walls still have wooden studs and manufacturers will often use 1/4-inch paneling to cover the framing.
What thickness Sheetrock is used in mobile homes?
What thickness sheetrock is used in mobile homes?
What kind of walls are used in mobile homes?
The walls can be made up of a variety of materials. In the old days, it was artificial wood paneling. Nowadays homes are made of either gypsum boards (of which there are a few different types) or vinyl panels. If you want more info, read this article: Mobile home walls.
What are mobile home wall strips made out of?
These wall strips are usually made of some form of plastic or wood. It is rare to find metal wall strips. They can be fastened to the wall with a variety of methods, but usually, nails, staples or tacks are used. So as you can see they are not there because mobile home manufacturers have bad taste, they do serve a purpose!
Are there any manufactured homes with drywall inside?
Manufactured homes with drywall instead of board and batten inside don’t have to be hard to find. Check out these Clayton manufactured homes with interior drywall finishes!
Why are vinyl walls used in manufactured homes?
Vinyl walls crack less frequently during the delivery, set up and settling process, reducing the indirect cost associated with manufactured homes. When manufacturers install drywall, they have to tape the joints and finish the walls with texture to hide inevitable imperfects that occur with all drywall installations.