Contents
- 1 When should I replace my ultrasonic tip?
- 2 Can you sharpen cavitron tips?
- 3 Can you ultrasonic cavitron tips?
- 4 How long do ultrasonic tips last?
- 5 How often should cavitron tips be replaced?
- 6 Can you autoclave a cavitron tip?
- 7 What do you call a Dentsply Cavitron tip?
- 8 How to increase the life of a Cavitron insert?
- 9 Are there any safety precautions with Cavitron inserts?
When should I replace my ultrasonic tip?
Generally, it is time to reorder when the insert/tip is operating at 25% efficiency (ie, loss of 1 mm of active tip). At 50% efficiency (ie, loss of 2 mm of the active tip) the insert/tip should be replaced.
Can you sharpen cavitron tips?
The last 1 -2 mm of the tip is the most active and once that is lost the efficacy of the tip is reduced by 25%. After 2 mm is worn, 50% of the tip’s efficacy is lost. While ultrasonic tips cannot be sharpened they do need to be replaced when worn.
How do you take care of cavitron tips?
Proper cleaning and care will help extend the life of your ultrasonic inserts. Cleaning – To clean, rinse inserts thoroughly or fully immerse in a mild ultrasonic cleaning solution. Inserts may be placed in an ultrasonic cleaning unit for 7-10 minutes or 16-20 minutes if the insert is in a cassette.
Can you ultrasonic cavitron tips?
A wide variety of tip designs are available for piezo electric ultrasonic dental scalers. Scaling tips used in magnetostrictive units are called inserts, a term that describes how the device fits into the handpiece.
How long do ultrasonic tips last?
Inserts will last approximately 8-15 months depending on the type of tip and hours used.
What is the difference between 25K and 30K ultrasonic inserts?
A 25K insert is designed to vibrate at 25,000 cycles per second while a 30K insert is designed to vibrate at 30,000 cycles per second–regardless of the power level setting on the generator.
How often should cavitron tips be replaced?
Inserts will last approximately 8-15 months depending on the type of tip and hours used. Periodically check Inserts for wear with the Cavitron™ Insert Efficiency Indicator.
Can you autoclave a cavitron tip?
Sterilization – Sterilize inserts in an instrument cassette or paper pouch in a steam autoclave. Steam sterilize for at least 4 minutes at 270°F/132°C or 30 minutes at 250°F/121°C. Do not heat above 275°F/135°C.
Can ultrasonic scaler damage teeth?
Conclusions: The results of this study suggest that ultrasonic scaling can cause further damage to teeth with enamel cracks, early caries and resin restorations. Therefore, accurate identification of tooth conditions and calculus before the initiation of ultrasonic scaling is necessary to minimize damage.
What do you call a Dentsply Cavitron tip?
Sometimes called Cavitron inserts, Dentsply offers multiple tip shapes and insert designs to match the angle at which you prefer to work. Cavitron tips are also color coded for additional ease in selecting correct components. One question we often encounter is how to care for Dentsply Cavitron Tips.
How to increase the life of a Cavitron insert?
Before placing the insert into the handpiece, performing the following steps will increase the o-ring life on Cavitron inserts: ENGLISH • Fill entire handpiece with water. • Lubricate o-ring (black or green rubber material) with water. • Gently twist the insert down into the handpiece until the insert is fully seated in place. WARNINGS
Which is the best brand of Cavitron tips?
Dentsply offers a full line of Cavitron Tips with the patented Focused Spray FS which provides ample cooling and flushing of work area without blocking your view. One of the first to offer the comfort grip design with a wider, ergonomic soft grip.
Are there any safety precautions with Cavitron inserts?
• Tips with high usage which exceed the warranty period should be discarded to avoid possible in-use breakage and possible injury. PRECAUTIONS • Cavitron ultrasonic inserts are designed and tested for maximum performance with Cavitron ultrasonic scalers.