Contents
Where is a water meter usually located?
Water meters are generally located near the curb in front of your home, in a direct line with your main outside faucet. In some cases, the meter may be located somewhere else on the property. Meters are housed in a concrete box usually marked “water”.
Why are water meters usually located in the front of the house?
Reading your water meter will tell you how much water you’re using and whether you have a leak. Most meters are located near the curb in front of your home under a concrete lid. To check for leaks, observe the large sweep or test hand for at least 15 minutes with all water turned off.
Are water meters in the ground?
Don’t have a water meter? Most water meters are fitted near the outside stop tap which can normally be found in the public footpath or verge – close to the boundary of your property. Look for a small metal or black plastic cover in the ground. Sometimes it’s not possible to install a meter outside.
How do I know what size my water meter is?
Many meters have their size located directly below the gallon count. Sometimes it is stamped on the metal below the dial face. It will be something like ¾” or 1”, in most residential cases. Sometimes it’s not there or so dirty you can’t find it.
What should a water meter reading look like?
Most analog dials have a low-flow indicator that turns as water moves through the water meter. This typically looks like a small triangle (shown), star or gear. Analog Example: The sweep hand is on the “1” so the read is 1,356,411 gallons. The last number on the right is a static zero (does not change).
How do I calculate my water bill?
To determine the amount of water used since your last reading, take the current meter read and subtract the previous meter read (from your water bill), which will give you the number of cubic meter/s used. For example, if your previous read was 001,200. and your new read is 001,250.
How does the water meter look like?
It’s small, round and about the size of a tin of beans. It has a row of black and red numbers, which move round as you use more water.
How do you calculate water meter reading?
How do you calculate your water usage? To calculate your water usage, subtract the (P) previous meter reading from the (C) current meter reading. In the Meter Example, the water consumption was 3 hundred cubic feet. (Meter Example: 900-897=3)Click here to see what your water usage means in dollars and cents.
Where do I Find my water meter in my house?
Before you go out and read your water meter, you need to find its location. In most residential neighborhoods it is located near the curb in the front of your home. Because it is the property of the city or water district it needs to be in a place where workers can come and access it without having to contact the homeowner.
Where can I find a water leak in my yard?
These are typically going to be located along an outside wall or in a utility area. Locate your water meter and open the cover to read the meter for a leak. If either arm on the screen is moving you have a leak the main service line. Don’t overlook those soggy areas in your yard, because they may indicate a leak below the surface.
Where are the water meters located in Houston?
This is why they are generally located in the front, but sometimes they are in the backyard, it all depends on where the main water line is in relation to your home. Once you find the meter, reading it is pretty easy. Most of the water meters in Houston read like an odometer in your car.
Where to find a water line in your front yard?
Look for the place where your service line comes out of the ground and goes into your home. This is most often in the front or corner of your home. However, in some homes in Atlanta, the shutoff is actually in the basement. A shutoff valve. Image source: Smart Home Water Guide To turn off the water, close the shut-off valve.