Which side of laminate do you start with?

Which side of laminate do you start with?

Begin the first row of flooring by placing the planks with the tongue side facing the wall. Install the second plank next to the first by aligning the tongue into the groove and press the plank down to snap it in place.

Where should I start my first row of laminate flooring?

How to Start the First Row on Laminate Floor if the Wall is Not Straight

• Step 1: Mark the Expansion Gap.
• Step 3: Begin at the Starting Wall.
• Step 5: Angle and Intersect Chalk Lines.
• Step 7: Lay the Cut Boards.
• Step 8: Lay the Other Floor Boards.
• Step 9: Rip and Angle the Course.

Does it matter which way you run laminate flooring?

In what direction should you lay a laminate floor? In most cases, you should lay your laminate flooring parallel to the longest side of the room or your home. This will create a more natural flow and will accentuate the length of the room better.

Do you have to cut the tongue of the first row of laminate?

We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. Insert the second plank into the first at an angle pressing the short ends together; then press it down.

Which side of laminate is the tongue?

The tongue on laminate flooring is the small flat edge on one side of the board, this is the top edge that is going to angle and lock into the bottom side of another board.

Can you start laying laminate flooring in the middle of a room?

4. Always start hardwood flooring along the most prominent and noticeable wall in the room. In order to keep the floor straight and square, start laying the laminate away from the wall because the wall may not be straight.

Can you change direction of laminate flooring?

13 Answers. Strip flooring can be installed in any direction in any room, however the convention is to run parallel with the longest wall in most situations. Rarely is this type of flooring run perpendicular to walls in a hallway.

Should all wood floors run the same direction?

Wood floors should always be laid perpendicular to floor joists—across rather that in between them. So, there is no right or wrong way to lay your wood flooring. Choosing which hardwood floor direction is more a matter of personal taste and the layout of your space.

How to determine the direction to install my laminate flooring?

The length of the planks will make your space appear larger. Consider your dimensions – a floating floor should not run more than 40ft long or 20ft wide, and must be broken up at these dimensions. Be mindful of the wood grain, pattern and design of your floor. Installing in a certain direction can help bring out textures and colors!

How to start the first row on laminate floor if the wall?

If the wall isn’t straight and you start a full course of flooring against it, then the whole floor will look crooked. The solution is to angle-cut the lengths of the first and last courses, so the floor is straight even if the walls aren’t. credit: Jupiterimages/Photos.com/Getty Images.

What should I do if my laminate flooring is crooked?

If the wall isn’t straight and you start a full course of flooring against it, then the whole floor will look crooked. The solution is to angle-cut the lengths of the first and last courses, so the floor is straight even if the walls aren’t.

What’s the best way to cut laminate flooring?

The course should look slightly thicker at the wider end of the room, but the cut edge of the boards should be sitting consistently 1/4 inch from the wall. Lay the rest of the floor course by course, snapping the pieces together at the sides and cutting them as needed at the ends.