Why does my candy dryer says Loc?

Why does my candy dryer says Loc?

Loc indicates Control is locked. This means the control panel has been locked and it will have to be unlocked before you can use the dryer. To unlock the control panel; press and release the Option and Select buttons at the same time.

What does loc mean on a tumble dryer?

Control Lock
The Loc Error code indicates that the Control Lock has been enabled. When the control is locked, the dryer will not start or operate. Some models will look like the following: Press and hold the Control Lock Key for 3 seconds to unlock the machine.

How do you reset a candy tumble dryer?

Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then push the reset button.

How do you unlock a candy washer?

To open the door, you could try a few thumps where the lock is on the appliance. If this doesn’t jar it loose, unplug the appliance from the wall socket and take the lid off. Reach down inside to the door lock and see if you can “jiggle” it free. If this too fails you’ll need to break the lock off the screws.

Why does my candy dryer keep stopping?

A blockage of lint can cause a lot of problems and if your tumble dryer suddenly starts shutting off then you should check your dryer’s lint filter. Cleaning the filter is relatively simple but finding it might not be. So, consult your tumble dryer’s instructions manual if you’re struggling to find it.

How do I remove the LOC from my Whirlpool dryer?

Press and hold the Control Lock Key for 3 seconds to unlock the machine. You will notice the machine count down from 3-2-1. The control lock may be a stand alone key, or it could be a dual function key paired with another button like Extra Rinse, Steam, etc.

How do you unlock a Whirlpool dryer?

To lock and unlock the dryer controls: Press and hold the Extended Tumble and – (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked. NOTE: The Power button can still be used when the machine is locked. How do I turn off control lock?

How do you unlock a dryer?

To lock and unlock the dryer controls: Press and hold the Extended Tumble and – (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked.

Where is the reset button on a candy Grand tumble dryer?

Three screws hold the button plate to the front panel. Slide off the top side pieces and remove the the three screws holding the front panel to the top. You can the lean the front panel out (its still held at the bottom) to get at the screws (take care not to drop them into the machine).

What does ” Loc ” mean on a Kenmore front load dryer?

The “LOC” indicates the (Control Lock). This means the control panel has been locked and it will have to be unlocked before you can use the dryer. To unlock the control panel; press and release the Option and Select buttons at the same time. I added a link to the where it covers your dryer’s features and the “Control Lock”. This may be the issue.

What does Loc mean on a candy Grand tumble dryer?

The “LOC” error indicates that the door lock is stuck and the machine is unable to lock or unlock the door. If the machine cannot lock the door, it will not begin the washing cycle. If it is unable to unlock the door, you cannot access your laundry at the end of the washing cycle. What does e15 mean on a candy Grand Vita tumble dryer?

Are there any error codes for candy appliances?

Fault codes or error codes for Candy appliances including Washing Machines, Washer Dryers, Tumble Dryers, Dishwashers, Refrigeration, Ovens , Freestanding Cookers and Built-in Appliances. Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe.

Why does my dryer not dry my clothes?

Dryer won’t dry clothes This could be due to issues with the filter, or indicate that the ventilation inlet grills are obstructed. An incorrect load or defective condenser unit can also be the culprits. As can the water tank not emptying. What does e22 mean on a candy tumble dryer?