Contents
Why does my petsafe wireless transmitter keeps beeping?
If the transmitter still beeps / no loop light on Short Loop Test, please contact our Customer Care Center to discuss having unit replaced. If the transmitter is functioning properly on the Short Loop Test, you have a break in your boundary wire.
Why is my dog watch fence beeping?
If there is a break in the boundary wire, you will hear an alarm coming from your DogWatch transmitter. If there is a wire break, the signal is interrupted and the fence will not work. If you hear this alarm, we recommend contacting your local DogWatch Dealer as soon as possible.
How do you reset an electric dog fence?
Resetting the system can be as simple as replacing the batteries in your transmitter. Bring your dog inside, and turn off the power to the fence. Unplug the transmitter. Look for metal objects around or on top of the fence.
How do I reset my PetSafe transmitter?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal.
How long does Invisible Fence wire last?
How long does the Invisible Fence wire last? Invisible Fence boundary wire is a direct burial grade wire and has a life expectancy of 27 years left undisturbed in the ground.
Why does my fence beep when there is a break?
If there is a break in the fence, the transmitter box will beep nonstop until the break is located and repaired. Since the fence line is invisible, the level of difficultly in locating the break in the fence increases.
Why does my extreme dog fence not work?
If so, this is likely causing the problem. Check your twisted wire. If it is wound too tightly, the coating may have come off in a spot. This causes the wires to become connected and the signal to not carry out to the loop. Why does my collar beep in one place on the fence, but not another?
Why does my dog’s collar not Beep again?
Walking parallel in the beep zone will not cause the collar to activate again. You have to walk in and then back out again to test. Another possibility is that you are piggybacking a utility line. This can happen if you don’t separate your dog fence wire from your utility lines by 4 feet when running parallel.