Contents
Why is my superior fireplace beeping?
Your “beeping” fireplace is telling you something: It’s time to replace batteries! The receiving unit will need fresh batteries more frequently than the remote control. Change these batteries along with the batteries in your smoke alarms.
How do you turn on a fireplace with a key?
How to Use a Gas Fireplace With a Key
- Look around the base of the fireplace and locate a small metal hole; this is the keyhole.
- Grasp the handle of the key, which looks like a long metal pole.
- Turn the key counterclockwise approximately 1/2 turn to release the flow of gas into the fireplace logs.
Why is my Skytech fireplace beeping?
If your remote has both buttons, press the “On” button. At this point, you should hear a beeping noise again and your fireplace should immediately turn on indicating your fireplace remote control has been synced with the receiver box.
How to properly operate a superior gas fireplace?
Superior Gas Fireplace Operating Instructions 1 Checking For Gas Leaks Before Lighting the Fireplace. Failing to take safety precautions before lighting any fireplace can result in a fire or explosion. 2 Lighting a Superior Gas Fireplace. 3 To Adjust the Flame or Turn Off the Fireplace. 4 Using Accessories to Turn On the Fireplace. …
What’s the best way to turn on a fireplace?
If your unit does have a fireplace key, remove the front cover of the fireplace so you can access the burner. Be sure that the pilot knob is in the “off” position. Wait five to ten minutes to allow any excess gas to clear out of the line. Before moving onto the first step of any method, it’s crucial that you have the chimney vent open.
Is there a remote control for a superior gas fireplace?
Some Superior fireplaces come with a remote control, rocker or wall switch. To ignite a unit’s burner by using these accessories, just turn them to the “on” position. Michelle Nati has written DIY and home improvement articles for The Farmers’ Almanac, ApartmentShowcase.com, and Oddee.com.
Do you need a key to turn on a gas fireplace?
Know where the control panel is, which switch you want to power it on and off with, etc. Some gas fireplaces will require you to open a gas valve using a fireplace key. If you don’t have a key, the unit might have an ignition switch on the control panel.