Contents
What is a basin wrench used for?
A basin wrench is a specialized tool for installing or removing kitchen and bathroom sink faucets. With its long shaft, it’s designed to reach up into the tight space underneath the sink and loosen or tighten the mounting nuts that are very hard to get to with other tools like standard wrenches or pliers.
What size is a basin nut?
Because fixed basin wrenches are designed specifically for removing tap backnuts, their sizes correspond with the standard sizes of plumbing nuts and fittings, typically BSP 1/2 inch and 3/4 inch which give an AF (across flats) measurement of 27mm and 32mm.
What is a basin wrench look like?
A basin wrench consists of a long shaft with a pair of asymmetrical jaws at one end and a transverse handle at the other end. The two jaws form an assembly in which the jaws are joined with a pivot pin.
How do you remove a mounting nut from a sink?
Using a basin wrench, reach up behind the sink basin from inside the vanity cabinet and grip the mounting nut that holds one of the faucet valve tailpieces to the sink or countertop. Turn the nut counterclockwise (viewed as you look upward at the nut from below) to loosen it, and unscrew it down the threaded tailpiece.
Are all basin taps the same thread?
Basin taps Pictured is a basin tap, with a 15mm thread. Bath taps look very similar, except they have a 22mm thread and may be joined together as a mixer.
How do I tighten the nut under the kitchen sink faucet?
Use a basin wrench to tighten the nut the rest of the way. A basin wrench has jaws that clamp onto the nut and a long handle so you can reach it easily. Fit the jaws of the wrench around the nut and rotate the handle clockwise. The jaws automatically tighten when you do this.
Can a basin wrench be used to loosen a nut?
However, a basin wrench can reach a nut in such areas easily. It can grasp the nut and allow the user to either tighten it or loosen it. Below are three types of basin wrenches. Fixed basin wrenches have a fixed jaw that can only be used for certain types of nuts.
How big are the back nuts on a basin tap?
Terrymac, the new taps have 27mm AP size back nuts (1/2” equivalent) so no problem with tightening them with my box spanner. So if your box spanner is too big for the back nuts on the old taps ,just put a shim into the spanner.
How old is the nut on a sink basin?
Made up a new basin waste the other day with some that is at least 12 years old and it worked as well as a new tub. Stuff lasts for ages. Although you put a good sausage of it on the basin waste lip, when you tighten the back nut, most of the P M oozes out – to be returned to the tub to be used another day.
Can you use a back nut on a Copper Basin?
That is no good when the basin is connected and no play on the copper,the one I linked to will loosen the tap connector and the tap backnut. Buy backnuts that your box spanner fits.
https://www.youtube.com/watch?v=YyV6_bhbL_M