Menu Close

How do I change the bulb on my license plate?

How do I change the bulb on my license plate?

Part 1 of 2: Remove the bulb

  1. Materials Needed.
  2. Step 1: Locate the license plate light.
  3. Step 2: Determine which bulb has failed.
  4. Step 3: Remove the license plate light cover.
  5. Step 4: Remove the bulb.
  6. Materials Needed.
  7. Step 1: Install the new bulb.
  8. Step 2: Complete the installation.

How do I remove a license plate bulb?

Grab the light bulbs with your fingers, and pull them straight out of the bases to remove them. If the light bulbs don’t come out easily, look for plastic or metal tabs holding them in place. Hold the tabs down with your finger or a screwdriver while you pull the light bulbs out.

How do you change a LED license plate light?

Install LED License Plate Light

  1. Take a flat head screwdriver and remove the license plate housing cover.
  2. Remove the bulb housing.
  3. Remove the stock license plate bulb.
  4. Directly replace with the new LED license plate bulb.
  5. Put everything back the same way it was removed.

How do you fix a tag light?

  1. Step 1: Remove the license plate light lens cover. Remove the hardware holding the license plate light lens cover in place.
  2. Step 4: Install the replacement bulb. Place the new bulb into the bulb socket.
  3. Step 1: Open the trunk.
  4. Step 2: Pull back the trim carpet.
  5. Step 3: Remove the license plate light bulb socket.

Why won’t my license plate lights work?

This could either be a problem with a relay switch, a loose connection or the license plate light has burnt out and needs to be replaced. Most license plate lightbulbs are the same, but you should always check with an auto parts store or contact a professional mechanic to replace the lightbulb with the right one.

What is a license plate bulb called?

The Ring Number Plate Lamp is designed to illuminate your rear number plate. It is E approved and comes complete with a fitted bulb.

What is a license plate bulb?

The license plate lamps are designed to illuminate the plate and registration tags on your vehicle and make it easily visible to law enforcement. In many states, a burnt out license plate bulb can get you a ticket. A license plate light utilizes a filament housed inside an inert-gas filled glass bulb.

Are all license plate lights the same?

A license plate light is required on the rear of a vehicle. Luckily, every new car already comes with this light built in, so the issue is just ensuring it does not break or burn out. However, old cars need to have a light added to be compliant with some state laws.

How do you install a license plate light?

How to Install a License Plate Light:

  1. Step 1: Buy New License Plate Lights.
  2. Step 2: Use a flat screwdriver to remove the license plate housing cover.
  3. Step 3: Remove the bulb housing gently and unscrew the stock bulb.
  4. Step 4: Screw your new LED light securely where the old one used to be and place it back in the housing.

Where do I change the light on my license plate?

Replace the black plastic cover and press in on the clips to lock the panel in place. Close the trunk and turn on the lights to test the new bulb. Locate the license plate light assembly in the rear bumper, directly above the license plate.

What to do if your license plate light bulb has failed?

Park your vehicle and set the emergency brake. Turn the ignition to the Accessory position and turn on the driving lights. Walk around the vehicle to determine which license plate bulb has failed. Step 3: Remove the license plate light cover. Remove the license plate light cover retaining screws using a screwdriver.

How do I install a new light bulb on my car?

Install the new bulb in its retainer and ensure it is in place. Tip: Refer to your car’s user manual to determine the correct type of light bulb to get for your specific vehicle. Step 2: Complete the installation. Put back the license plate light cover and hold it in place.

How do you replace a 2825 license plate light bulb?

Grab the bulb under the lens and pull it from the assembly. Grab a new 2825 license plate bulb with a clean, lint-free cloth and press it into the license plate light assembly. Don’t touch the bulb with your bare hands, as the oil from your hands can cause premature bulb failure.