How do I reset my Weighmax digital scale?

How do I reset my Weighmax digital scale?

How do I reset my Weighmax scale?

1. First wash the scale with water and then use acetone or ethanol. Allow the scale to completely dry, normally about 20 minutes.
2. Take the batteries out of the scale for twenty seconds to reset the scale. Put the batteries back in and try to weigh yourself normally.
3. Simple.

How do you calibrate a Weighmax 100g scale?

Calibrating the Scale Place the scale on a flat surface in a room at normal room temperature. Turn on the scale. Wait until the scale reads 0. Press and hold the calibrate key, which is marked “CAL.” Wait until “CAL” is displayed on the LCD screen.

How do you recalibrate a scale?

Set the scale on a flat, level surface and turn it on. Wait a few moments for the scale to stabilize its readings. Locate the calibration switch (some scales require a sequence of numbers on the control panel) and activate the calibration mode. Place the quarter on the center of the scale and check the reading.

How do you calibrate a gram scale?

Calibration 101

1. Press ON/OFF to turn the scale on, and wait for the scale to stabilize, where it reads 0.0g.
2. Press and hold the MODE key, the middle button that says “M”, until the display reads “CAL”.
3. Take one more look at the platform to make sure it is totally bare.

How can I Reset my weight on the scale?

Avoid setting your scale on surfaces like carpet or uneven tiling. Press the center of the scale with one foot to wake it up. The scale will calibrate and display a series of dashes. “0.0” will appear on the screen. Step on the center of the scale. Remain still on the scale until your weight appears.

Where can I find the weighmax user manual?

Locate the user manual that came with your WeighMax scale. The manual has specific instructions for calibrating your scale. If you do not have the user manual, go to the WeighMax website and contact the company for a copy of the user manual. Select a WeighMax calibration accessory equal to the maximum weight for your type of WeighMax scale.

What do I need to calibrate my weighmax scale?

These calibration accessories are small weights of different mass, such as 50, 100, 200 and 500 grams. WeighMax scales can be calibrated using either WeighMax calibration accessories or any other object with a known mass. Locate the user manual that came with your WeighMax scale. The manual has specific instructions for calibrating your scale.

What should I do if my digital scale is not working?

If one exists, turn it until the scale reads zero. If not, your scale may feature a special code to reset it to factory conditions. For example, some models require stepping on a specific corner two or three times to clear all digital codes and return the scale to zero.