Menu Close

How do you take apart Rainbow vacuum attachments?

How do you take apart Rainbow vacuum attachments?

DISASSEMBLING AN E-SERIES RAINBOW VACUUM

  1. Be sure that your vacuum is turned off and unplugged.
  2. Find the attachment button for the main hose, press it and release the hose.
  3. Press the latches on the sides of the hose and remove the entire hose portion.
  4. Remove the additional latches by the largest part of the unit.

How do you clean vacuum brush attachments?

You just need a small bucket with warm water and a squirt of mild detergent like dish soap. This should loosen up and completely remove any caked on grime or dirt left on the bristles as well as inside the tool. Step 3: Scrub-a-dub-dub! Let it soak for about 30 minutes to an hour.

How do you take the top off a Rainbow vacuum?

Basic Disassembly Unplug the Rainbow E2 vacuum from the wall outlet. Pull the tool being used on the machine from the lower curved wand. Take the lower curved wand out of the straight wand. Remove the straight wand from the curved handle, or upper, wand.

What is the vacuum brush attachment for?

A Brush for Dust You can identify the dust brush as the circular or rectangular accessory with long bristles. As the name suggests, this attachment is designed for dusting. Its long, soft hairs are gentle and won’t scratch surfaces. Use it on furniture, blinds, lampshades, or on the dashboard of your car.

How do you use vacuum cleaner attachments?

Use the circular dust brush attachment and start at the ceiling. You may need to add an extension to your attachment or use a step stool or small ladder in order to reach higher surfaces. Work your way down from ceiling to floor in a vertical motion as you vacuum.

Can I vacuum water with my Rainbow?

Can the Rainbow vacuum up water? The simple answer is: absolutely yes! In fact, not only can you pick up liquids with the Rainbow Cleaning System, you should.

How big of an attachment do I need for my Rainbow vacuum cleaner?

Find a larger water basin, or a power nozzle attachment that can help you clean your carpet more efficiently. We even carry longer hoses in lengths from 6 feet through 30 feet that can make it easier to clean an entire room without having to move the unit constantly.

What are the attachments for the Rainbow Cleaning System?

Harness the power of your Rainbow to clean every inch of your home with our specially designed tools. These attachments come standard with every Rainbow. For clean and attractive looking hardwood floors and linoleum and ceramic tile, the floor and wall brush does an outstanding job of removing surface litter and dirt.

Where do you use rainbow upholstery cleaning tool?

Deeply embedded dirt can reduce the life and vibrancy of fabric. The Rainbow Upholstery Tool effectively removes dirt from upholstered furniture. Use the crevice tool to clean in narrow and tight spaces, such as between radiator sections, under radiators, along floor edges and baseboards.

Do you need to vacuum before using rainbow carpet shampoo?

Carpets should be thoroughly vacuumed before being shampooed with the Rainbow Aquamate The Rainbow vacuum cleaner carpet shampoo attachment is called the “Aquamate”. The instruction leaflet says it “works effectively” on all types of carpet. The leaflet also claims carpets “dry overnight” after being washed and rinsed with the Aquamate.

How do you take apart rainbow vacuum attachments?

How do you take apart rainbow vacuum attachments?

DISASSEMBLING AN E-SERIES RAINBOW VACUUM

  1. Be sure that your vacuum is turned off and unplugged.
  2. Find the attachment button for the main hose, press it and release the hose.
  3. Press the latches on the sides of the hose and remove the entire hose portion.
  4. Remove the additional latches by the largest part of the unit.

Why does my rainbow vacuum stink?

That happens because the smell of stagnated dirty water for a long time goes inside the rainbow and impregnates in the HEPA filter. In order to remove this bad smell, you’ll need to remove, clean and reinstall your HEPA filter. Fill with water as always and let the Rainbow running for 10 minutes.

How do you adjust a rainbow power nozzle?

HEIGHT ADJUSTMENT OPERATING THE POWER NOZZLE: Hold the Power Nozzle. Squeeze the switch actuator (see page 4) and slowly guide the Power Nozzle back and forth in smooth and easy strokes. Let the Power Nozzle and the Rainbow Cleaner do the work.

What scents can I put in my rainbow vacuum?

Indulge your senses with the Luxury Collection, available in four intriguing spa scents.

  • Lavender Juniper.
  • Mandarin Rosewood.
  • Orange Ginger.
  • Tea Tree Mint.

Can I put Pine Sol in my Rainbow vacuum?

Rainbow Vacuum Cleaner Tips Don’t let it get sludgy. With it’s water filtration the Rainbow makes a great dusting machine. Put a few drops of PineSol in the water. Smells great.

How do you clean a Rainbow vacuum filter?

Run the vacuum with an empty water basin for about 30 minutes to dry the filter. Clean the separator ring after each use. Tip the unit over and remove the separator by unscrewing the nut.

How do you fix an E series Rainbow vacuum?

Drain dirty water from the basin and discard any extra debris at the bottom of the basin. Refill the basin with cool water until it reaches just above the center dome. If the water level goes too high, it might brush against the power unit and damage the motor. Clean the water basin after each use.

What’s the best way to clean a rainbow?

Throw away the dirty water and clean the Rainbow basin immediately after each use. Store your Rainbow in a clean and dry place without the water basin in place. Store the water basin separate from the Rainbow after clean it. If you want to leave it running at minimum speed to aromatize and clean the air in your home, use it with clean water.

What to do if your Rainbow vacuum is making noise?

Check the HEPA filter for clogs; when properly cleaned, the filter will help reduce the noise production of the unit. Remove the HEPA filter and rinse it under cool water. Shake excess water from the filter, and place it back inside the power unit. Run the vacuum with an empty water basin for about 30 minutes to dry the filter.