Menu Close

How much horsepower can a T700 hold?

How much horsepower can a T700 hold?

T700. Our GM T700 is built for both street and strip applications, and can handle up to 500 horsepower.

Can a 700R4 handle 500 HP?

The Street/Strip 700R4 is good for about 550 hp maximum, but with the HD input drum it is good for about 625 hp max. Add another $240.00 for the input drum.

Can a 4L60E handle 1000HP?

supports up to +1000HP.

Can a 4L60E handle 450 horsepower?

A well built 4l60e can handle some serious power. We have cars running 500-600 and 700 rwhp as the power increases of course the odds of failure do increase but we have had very good results.

Is a 4L60E better than a 700R4?

You can’t tell the difference between a 700R4 and a 4L60E by the oil pan as they are nearly the same. If the transmission has a large 18-pin electronic connector above the passenger side pan rail, it’s a 4L60E, as seen here. None of this is breaking news, and both transmissions offer the same advantages.

How can you tell if a 700R4 is good?

Find one that has the dipstick in place and look for signs of leaks. The vehicle from which the tranny is being pulled should give a clue to its reliability. Ask for at least a partial refund if the tranny is found to be bad. If you find at least a 85+ tranny it’s a good core to rebuild.

Can I put a 4L80E in place of a 4L60E?

Swapping from the 4L60E to the 4L80E is not difficult to do in vehicles that were equipped with both transmissions. Here are the main parts that you are going to need in order to make your own 4L60E to 4L80E swap kit. It’s not the easiest swap to do, and a 4L60E can handle a lot of power on its own.

How much HP can a stock 5.3 handle?

The stock 5.3L is factory rated around 320 hp with 340 lb-ft of torque. Most people will tell you 500-550 rwhp is a reasonably safe limit to push a stock bottom end.

What’s the power of a General Electric T700?

The T700-GE-700 is rated at 1,622 shp (1,210 kW) intermediate power. The T700-GE-700 was followed by improved and uprated Army engine variants for the UH-60 Black Hawk and the AH-64 Apache helicopters, as well as marinized naval engine variants for the SH-60 Seahawk derivative of the Black Hawk, the SH-2G Seasprite, and the Bell AH-1W Supercobra.

What kind of helicopter engine is the T700?

T700/T6A. Powers the EH industries EH101 helicopters for Canada and Italy, while the T700-T6E1 was the first engine used for NH90 shipboard trials.

What’s the difference between the T700 and T706 engine?

The YT706 engine is based on the CT7-8A engine. Compared with the H-60’s primary T700 engine, the T706 has a larger compressor, hot section improvements, and full authority digital engine control. The T706 is rated at 2,600 shp (1,939 kW) and increases the hot-and-high mission capability of the U.S.

Which is the commercial version of the T700?

CT7 turboshaft: Commercial version of T700. CT7-6/-6A: The CT7-6/-6A turboshaft engines are upgraded commercial variants of the successful T700/CT7 engine family. The turboshaft engine powers the entire development fleet of AgustaWestland AW101 helicopters with thousands of flight hours of operation.