Contents
What are curtain tiers?
A tier is a tailored or ruffled window treatment that is hung in the middle of the window to the window sill. It is. often used with a valance or a swag hung over the tier. A tier is also referred to as a café or a privacy tier.
What does a Tier Curtain look like?
A tier is also referred to as a café or a privacy tier. alone for a simple look or can be used over a tier, panel or a hard window treatment. In this look, the swag drapes in the middle like a valance; the ends, either cut into diagonals or simply hemmed, softly hang down on each side of the window.
What is a curtain panel?
Curtain panels or drapery panels are both stationary side panels that frame a door or window. Commonly used to frame blinds, shutters or shades in the window, or on either side of a doorway between rooms. This window treatment can make a design statement in the room.
What are half curtains called?
Curtains. The short, sheer curtains that cover only the bottom half of a window over a kitchen sink, frequently matched to a valance across the window’s top, are called café curtains.
How do you measure for curtain tiers?
Measure from the top of the curtain rod down to where you want the curtain to fall. The length of the curtain includes the rod pocket, but not the heading. Tier curtains typically cover the lower half of a window, ending at the sill.
How much space do you need between curtains and valances?
The pole or valance should be positioned a minimum of 4 inches and a maximum of 12 inches above the top of the window in most cases. Even a budget valance or unlined curtain panel can look well done and professional when hung at the proper height above the window. Don’t know anything about installing curtain rods?
How long should tier curtains be?
Tier curtains, also referred to as café curtains or kitchen tiers, come in 24-inch and 36-inch lengths. Panel widths vary according to style and manufacturer, but 54 inches is a standard width. Measure the width of your window and add 2 inches for seam allowances.
What’s the difference between a panel and a curtain?
The difference between curtains and window panels is one of semantics. A panel is a length of fabric, hemmed at the bottom, that hangs in front of a window. “Curtains” is a broad term that covers drapes, cafes and other fabric window treatments.
Do I need one or two curtain panels?
When most people think of curtains, they think of two pieces of fabric, one on each side of a window. But most curtains are sold in panels. A panel is a single curtain, so it is one piece of fabric. So if you want that traditional curtain look, you will need to buy two curtain panels.
What can you do with kitchen tier curtains?
Kitchen tier curtains are also referred to as café curtains and can be used in bedrooms, family rooms, basement, boat windows or anywhere a half curtain is needed Blossom Tier, Valance & Swag 1 review
What is a curtain panel and what is it used for?
Curtain panels can be combined in many different configurations, depending on the types of windows you have. A curtain panel is a single curtain section that can be used alone in some window treatment situations or with other panels to create a fuller look or more functional effect.
How tall should the tiers be on a window?
Tiers usually cover only the lower half of the window, so figure half the height for the length of the curtain. If you want to block more of the window for greater privacy, simply adjust the height/length measurement.
How tall are thermal curtains in feet and inches?
50 inches wide x 13 inch – 108 inch Tall Thermal Drapes: 52″ wide x 84″, 95″ or 108″ long thermal curtain panel, covers up to 40″ width: 54″ wide x 15″ and 24″ tall / long: 54″ wide x 63″ Tall Curtain Panel: 54″ wide x 72″ Tall / Long Sungle Curtain Panel: 54″ wide x 84″ Tall / Long Single Curtain Panel: 54″ wide x 95″ Tall / Long Curtain Panel