Menu Close

What is the best adhesive for rubber to concrete?

Jim Brown

What is the best adhesive for rubber to concrete?

Copps’ K-550 Epoxy is a two-part room temperature cure epoxy system ideal for commercial construction use. This rubber flooring adhesive is specially formulated to bond rubber flooring to concrete, wood, metal, and other substrates, giving it superior bond strength to a variety of surfaces.

How do you keep rubber mats from slipping on concrete?

Adhere the mats to the floor using either a high quality rubber or vinyl glue. This is also an option if you are worried about any mat movement. Contact your local hardware store for the best rubber, vinyl or silicone glue. Tape the mats to the floor with an industrial strength tape.

Does rubber flooring need to be glued down?

Alternatively, glue down rubber flooring is recommended for areas that are bound to see a lot of foot traffic or other heavy use. Many athletic/gym floors are better off with a glue down method to ensure flooring doesn’t slip around under high impact activity.

How do you stick rubber mats?

You lay the mat in position. Peel back some of the mat (whilst positioned upon it) and apply some glue. Stick that bit down pushing or pressing from the middle out. Then swivel round and peel back and do the rest.

Does mortar adhere to rubber?

Contact cement works best on plastics, veneers, rubber, glass, metal and leather. Contact cement is already dry on contact. Once the solvent evaporates, the cement forms a flexible bond with no residual moisture. There is no need for clamping, so it can be used for gluing floor tiles, as well.

Can I install rubber flooring on concrete?

While rolled rubber flooring is perfect for flat concrete slabs, it must be glued down if you are installing it over concrete steps. Therefore, it’s better to use an adhesive to keep the rubber flooring in place.

Can you glue rubber mats together?

Polyurethane glues, also known as urethane or wood glues, are the best types of glues to use with our rubber flooring. Polyurethane adhesives are a moisture curing adhesive that bond tightly to the floor and subfloor, so no movement is happening with your new floor.


What is the best adhesive for rubber to concrete?

Jim Brown

What is the best adhesive for rubber to concrete?

Copps’ K-550 Epoxy is a two-part room temperature cure epoxy system ideal for commercial construction use. This rubber flooring adhesive is specially formulated to bond rubber flooring to concrete, wood, metal, and other substrates, giving it superior bond strength to a variety of surfaces.

Can you bond EPDM to concrete?

You can glue the epdm directly to concrete, so long as its perfectly clean and dust free, with contact adhesive applied to rubber and concrete. Unless you have used the product before, give it a miss as when you lay it, it will grab straight away, any mistakes or bubbles will never be rectified.

Does concrete adhere to rubber?

Concrete and rubber can easily bond together. If you are trying to adhere rubber to concrete on either the inside or outside of your house, there is an adhesive that will allow the two to bond together and form a strong connection that will be hard to break up.

Do I have to glue EPDM?

If you are fitting a one piece EPDM roof then you will need to glue it down, unless it’s ballasted or mechanically fixed (more on this later). The trouble with this is that the glues used in rubber roofs do not like the presence of contaminants such as bitumen or asphalt.

Is it OK to glue EPDM to concrete?

Accordingly, does EPDM stick to concrete? You can glue the epdm directly to concrete, so long as its perfectly clean and dust free, with contact adhesive applied to rubber and concrete. Unless you have used the product before, give it a miss as when you lay it, it will grab straight away, any mistakes or bubbles will never be rectified.

What kind of adhesive can I use to bond EPDM rubber?

Generally bond strength of this industrial adhesive exceeds that of the substrate material (in destructive tests, the EPDM rubber will tear). Using a cyanoacrylate adhesive can be restrictive – gap fill is <0.5mm and the adhesive doesn’t lend itself to spreading with a roller or scraper.

How do you put EPDM on concrete roof?

How we do it is, strip all existing felt, screw osb3 1200mm x 600mm t&g roof boards to deck, loose lay the rubber to relax, fold back half the rubber apply water based adhesive to deck only, fold back the rubber, repeat for other side. If done correctly you will have a perfect roof.

What kind of adhesive do you use to glue concrete?

Add another bead of rubber adhesive, if the piece of rubber is wider than six inches. Accordingly, does EPDM stick to concrete? You can glue the epdm directly to concrete, so long as its perfectly clean and dust free, with contact adhesive applied to rubber and concrete.