What size are the nuts on closet bolts?

Install the threaded adapters onto the toilet bolts. A set of replacement toilet caps typically includes two different sets of threaded adapters: 1/4 inch and 5/16 inch. The 1/4-inch size is the more standard.

What size wrench do I need for toilet bolts?

1/2-in.
If the bolts are metal, you might be able to unscrew the nuts with a pliers, but the best tool for this job is a socket wrench equipped with a deep-well socket (Photo 1). Most toilet seats require a 1/2-in. socket. The deep socket fits over the long bolt and grips the nut tightly.

Are toilet floor bolts universal?

Floor bolts features: One pair bolts with double nuts and washers for toilet upside and bottom. 3. Universal fit for most toilet.

What size are Johnny bolts nuts?

Johni-Bolts® Size: 0.25 x 2.25 in.

Are all toilet bolts the same size?

There are three possible measurement distances you can get from the wall to the toilet bolt: 10 inches, 12 inches, or 14 inches. The most common is 12 inches. In plumbing terminology, this is called a 12-inch rough. Sometimes these measurements are not exact.

What is a toilet bolt lock wrench?

Trust the proven Fluidmaster 7110M Jam-Bar Toilet Bolt Lock Wrench when removing an old toilet bowl or toilet tank. Perfect for Pros, the Jam-Bar toilet wrench offers a flat blade design to slip into tight spaces and easily work under toilet bolts.

What are toilet closet bolts?

The johni quick bolt is a unique bolting system for mounting toilets. Eliminates wobbly bolts and the need for double-nutting, flimsy wax, putty, or thin plastic washers. Fast; easy; and secure. Just push down on the gold-colored plastic washer (no need to “screw on”), and then turn to tighten.

How small can you make a toilet room?

The size for a separate toilet compartment should be at least 36×66 inches with a swing-out or pocket door. Code Requirement: The minimum size for a separate toilet compartment is 30×60 inches.

What kind of bolts are in a closet?

PROFLO® 1/4 in. x 2-1/4 in. Brass Plated Steel Closet Bolts with Round Steel Washers and HEX Steel Nuts PROFLO® 1/4 in. x 2-1/4 in. Brass Plated Steel Closet Bolts with Oval Steel Washers and HEX Steel Nuts

How do you remove bolts from a closet?

Remove the nuts and washers holding the original closet bolts in the flange. Slide the bolts along the slots in the flange to the keyhole opening. Lift the bolts from the flange.

Where do you measure the bolts on a toilet?

Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones.

What do you use to fasten a bathroom closet?

Closet Bolts are threaded fasteners with a T-style heads designed for securing toilets. Key specifications include the thread size, length, and material. Closet bolts are used primarily for fastening a water closet to the plumbing flange.